PDA

View Full Version : 82 250r axle question


flynfish
08-02-2015, 05:27 PM
Hey all I just got what I was told was an extended 200x axle. After some googling I found out it's an 82r axle. My question is how long are the stock axles end to end, this one measured out at 39.5 I ask so that I know what I have here thanks,
flynfish
08-03-2015, 10:00 PM
Just got a pic to upload

Sent from my LGL34C using Tapatalk
shortline10
08-04-2015, 04:28 AM
Looks like a +6" 200x axle to me . It will work on an 82r if you use the 200x sprocket set up .
flynfish
08-04-2015, 09:17 AM
Thanks short line. Based on measurements I provided durablue yesterday I believe it's one of there's

Sent from my LGL34C using Tapatalk
shortline10
08-04-2015, 09:40 AM
If it requires hub spacers then yes durablue . Could also be a finishline , maxtrax or NASA
flynfish
08-04-2015, 09:54 AM
Went out to check it and it doesn't require spacers. Again.thanks for the help

Sent from my LGL34C using Tapatalk
flynfish
08-04-2015, 10:04 AM
Was finally able.to load these close up pics of the axle. Dang phone takes forever

Sent from my LGL34C using Tapatalk
atc300r
08-04-2015, 10:28 AM
It looks like a NASA. I have both a Durablue and NASA for an 82 250 r plus a NASA for my 81 250 r. And your axle looks like my NASA . Do you have the hub nuts.
flynfish
08-04-2015, 10:46 AM
No how it's in pics is how I got it.

Sent from my LGL34C using Tapatalk
flynfish
08-04-2015, 10:48 AM
[QUOTE=flynfish;1378892]No how it's in pics is how I got it. Have extra 200x sprocket hub and axle nuts and they slid on with no slip or slop.



Sent from my LGL34C using Tapatalk
flynfish
08-04-2015, 11:20 AM
Atc300r. I would appreciate any other information you could give on this axle. Tried googling them and nothing. Thanks

Sent from my LGL34C using Tapatalk