PDA

View Full Version : aftermarket bearing carrier bearings same as stock bearings? 86 250r


jrooster
07-31-2015, 05:05 PM
looking at buying some new carrier bearings but the trike came with a aftermarket aluminum carrier. Would the bearings be the same as stock ones so i know what to order?
yaegerb
07-31-2015, 05:10 PM
Likely the aftermarket carrier is a "double row" bearing. The bearings used in the aftermarket are actually thicker than in OEM setups. You can order the thicker bearing kit from all balls.
jrooster
07-31-2015, 05:15 PM
would you happen to have a part number? all i can find is the OEM replacement. Thanks
yaegerb
07-31-2015, 05:38 PM
25-1401 is the number

Link:http://www.allballsracing.com/ymmsearch/index/searchfromhome/
jrooster
08-12-2015, 03:28 AM
would this be a double bearing? it is about .75 inches. maybe 1/32 over .75. 219793
yaegerb
08-12-2015, 11:13 AM
Yes that's it
jrooster
08-12-2015, 02:20 PM
Yes that's it

thanks for helping me out!
yaegerb
08-13-2015, 07:35 PM
No problem, anytime.
oscarmayer
08-13-2015, 08:03 PM
Make sure that is not a double rowed bearing. Stock was single rowed. I would measure and find some that match measurements as well as there are
Numbers on the seal part of it that you can reference.


Sent from my iPhone using Tapatalk
jrooster
08-14-2015, 01:23 PM
Make sure that is not a double rowed bearing. Stock was single rowed. I would measure and find some that match measurements as well as there are
Numbers on the seal part of it that you can reference.


Sent from my iPhone using Tapatalk


Now im confussed. I dont want a double rowed bearing?
yaegerb
08-14-2015, 01:26 PM
Now im confussed. I dont want a double rowed bearing?

no offense Oscar, but I have no idea what you are talking about. He said he has an aftermarket carrier. They hold double-row bearings (they aren't actually two bearings mashed together) they are a thicker bearing, 1 per side. jrooster, that bearing in your hand is 3/4 of an inch wide so you need the bearing kit I pasted a couple posts back.
jrooster
08-14-2015, 10:09 PM
OK just making sure thanks again! Also, in the 25-1401 all balls kit, what are the 2 orings and how do they go in? i dont remember seeing these while removing the old ones.
yaegerb
08-14-2015, 11:31 PM
You don't use those on an aftermarket carrier. Those are for the OEM carrier. Don't know why they include them.