Carb Intake Mods

[sweetip2000]

Is there a way to run something straight off the intake of the carb and eliminate the air box and all that snorkle stuff ? This is for a Honda 250SX but probably would work on other ATC's too. Need to know what air filter to use and what parts are needed. Thanks pics vids would be helpful too

[Dirtcrasher]

They have POD filters from UNI, you just measure the back of your carburetors inlet. They are 30 degrees offset to turn it to a place to fit.

I always run an "Outerwears" cover over it.

It makes for a severely lean condition so you better had be good at jetting. But that done right with a free flowing exhaust is a huge difference.

I think you said 250SX which is a model that most people run thru mud and water, thats not a good "no air box application". No A/B apps are good for racing or trail riding on dry days.

[barnett468]

.
use the red ones as dirt crasher suggested . . they are the second and third ones down . . the second one down is straight . . the third one down has an angle on it which according to dirt crasher is the one you need because hey do not show a 30 degree one.

http://www.unifilter.com/clamp-on/