PKW Air Strkyer..

[dabody69]

I have an 86 250r, it has what I believe is a Motion pro twist throttle on it, it currently has the stock carb, I would like to purchase an PKW A/S, can someone tell me what size is acceptable to put on a stock bore, it does have an after market DG pipe and silencer otherwise is stock.. Will the throttle cable just hook right up like it does now?? I also may be purchasing a Paul turner high rev pipe, if that makes a difference, thanks guys

[El Camexican]

What do you plan to do with the trike most of the time? Your answer will determine either a 36 or a 38.

[dabody69]

Just midwest trail riding, sometimes wide open fields, going to the dunes very very little.. Go Hawks.. watching them now

[RubberSalt]

36 for more mid range, 38mm for more top end. With trail riding, I'd grab the 38, but I always look for the most power :-D

36 would do it for you. If you want more performance, a carb is something to complement a port job.

[81k]

I had a 36 on my 85 250R that i had with a Paul Turner hi rev, stock bore/ stroke. I rode mostly trails amd was very happy with its performance. This combination worked well for me in what sounds like simi.lar riding conditions to you

[250rRoostmaster]

For trails i'd go with a 36mm personally