is the 350x front spindle the same as the 200x?

[oscarmayer]

Does anyone know if the front bearing spindles on a 200x interchangeable to a 350x? I have a nearly new 200x front that I would love to be able to clean up, replace the seals and bearings and sue it as a spare for my 350x Baja project but I wanted to see if they were interchangeable first.

[frankydodo]

Maybe im wrong but a friend of mine gave me a 200x hub because he could not get his caliper instal on his 350x with this hub

[oscarmayer]

I have a complete 200x front setup so I can use the 200x stuff completely. I am ok with that.

[Jmoozy27]

Mike, what do you mean by spindle? The 2 fronts are similar but different if that makes any since. 200x has smaller diameter forks. The rims for the 2nd gen x are the same as 350x just mount the opposite way. Triples have different rake but the fenders have the same bolt patterns.

[onformula1]

Mike is asking if the front hub is the same on a first gen 200X and a 350X.

He says spindle a lot because of his sons quad. :lol: (That's twice Mike)

[oscarmayer]

haha sorry guys yea I have been quadded out a lot lately. :/ just spend several months getting his quad to where I think it is up to snuff. so takes it me time to switch lingo.
my bad. :(
yea front hub. can I use a 200X front hub on a 350x?

[KASEY]

stay with a 350x.. there are subtle differences and require different spacers to get correct alignment,, they are not exactly the same NO...

[oscarmayer]

ok thanks Kasey, That's what I needed to know. I will do it.
front hubs are cheap enough to order a spare is EZ.

[Dirtcrasher]

Kasey is so right. Honda made so many changes in their hubs. An 86/87 200X hub will fit but it may need to be moved one way or the other a few thousandths.

This is why you guys should all have a cheap HF gear head lathe to make your own collars and spacers.....

[oscarmayer]

yea I do need a lathe. next year i'll get one. not this year. all my $ went into my son's quad and into the 350x :(