"Pay it Forward" ------------>Lets get this part "y" started<-----------------

[Mr. Clean]

I have a OEM TRI Z Gas tank with brackets, cap and hardware. Have had it for a couple years and have zero use for it, tried to sell it and could not, I cant bring myself to throw it away.

Pay shipping and of course PAY IT FORWARD and its yours.

Of course if the MODS want to move or change this thread have at it!!

[yaegerb]

I have an entire first gen 200x bottom end with crank...no piston, no top-end. I can take pictures upon request. Just acquired this and have no use for it.

If you pay shipping and PAY IT FORWARD within this thread, its yours.

[83ATC185]

I have 3 185/200 carb bodies and associated parts that need a home and a 185 clarke tank without a petcock, as well as an 84 200s seat with a quarter size hole in the cover. Also a hondaline trailer hitch for 185/200's. Pics upon request.

[madmass]

I've got an early model 90 straight rear axle with the wide splines and sproket hub still on it. An early model 90 carb oem. Needs a kit but great for parts. Plastic aftermarket gas tank, was suppose to be for a 90 but seems to fit tight on the frame with a single fuel outlet on the right side.

[RIDE-RED 250r]

Im in! :)

I have a set of OEM 350x tank scoops sitting on a shelf in the garage. Color is and finish is very fair and one or both do have a minor stress crack (barely noticeable). I would not call these "restoration quality", but nice "OEM rider" scoops.

-Shipping to lower 48 on recipient's word to reimburse shipping once I get them on their way and get the price.
-Alaska, Hawaii, and Canada: We would have to take it a step at a time.

Pics below and of course, pay it forward. :)

One last thing: I might need to hang on to the little brackets. I am not sure if the new Maiers I have for the wife's 350x will need them or not yet. I will check.

[jakeesspoo]

i have a 1984 honda 110 seat that i no longer need. Bottom sides are rusted out buti got a new cover on it. Its not pretty but could get someone by a few years. Theres wrinkles in the vinyl. Never used spray adhesive before and used it to put on cover and damn did it grab so theres no getting out the wrinkles and i learned a lesson. It would at least look better than a completely duct taped seat. Its up for grabs if uou pay the sctual shipping. Honor system. I would tell you the actual shipping cost

[oscarmayer]

I have a set of rims for a 82-84BigRed (may even fit the 85087) with the tractor style tires. I will honestly never use them. When I redo my Red, I will be installing new allow rims instead of the stocker steeliest. I will also install new tires. These are slightly dry rotted but still useable. If you want them they are yours. just pay for shipping. I think around $40-$50 is what it costs for the set.

[RubberSalt]

I've got some parts to rebuilt the tecate stator if anyone needs their's rebuilt. Pay for shipping and I'll rebuild the ignition side of the stators for no cost (as long as you test them!)

Message me for my contact info.

[ironchop]

bumpity bump

[muthey]

I have a set of rear fenders for a ytm 200 and a headlight bezel for a ytm 200. fenders are crack free just need to be polished, the headlight bezel is in beautiful condition, have other parts as well. Headlight bezel is gone.
215035215036215037215038

[f76]

200x miscellaneous items. Rear brake hub and disc, decent shape. Thumb throttle, moves freely. Axle jam nuts. Tail light bracket and back plastic half. Chain sliders, used but plenty of life left. And a random sprocket or brake hub, 39 spline. Pay shipping and you can have whatever you want.

[f76]

http://images.tapatalk-cdn.com/15/04/24/c31e75bb1308f19079b8f72d0830bb13.jpg
http://images.tapatalk-cdn.com/15/04/24/94ad90bfdc29a365aff03a790ba8278a.jpg
http://images.tapatalk-cdn.com/15/04/24/ea6f2039df1df79fdac71922471aeefa.jpg

[R-N-D]

I have a rim that is in great condition, freshly powder coated as well. Unfortunately, I do not know what it fits. I thought it would fit my 84' 200es but it didn't. Of course, I found this out after having it powder coated. It is obviously a 4 bolt with looks to be a 4" spread between the holes. Pictures tell the story but it measures 10" in diameter and stands 10" in width. Honestly, all I know but take a look. Yours for the simple cost of "Paying it forward" as the thread states. Within the states, I'll pay the shipping since it's only around $10-15 I assume. Anywhere else, shoot me a zip or postal code and I can get a quote. Thanks.

[90guy]

Let's see I've got a box of some 1st gen 200x stuff. K&N air filter in good useable shape. Part of a gasket set all that was removed was to do a clutch . 3 Barnett dirt digger clutch plates. They haven't been used just soaking in oil. Since they sent me 3 instead of 5. Just pay the ride and everything's yours. I'll get some pics.

[Jmoozy27]

Bunch of 200s stuff. Axle, shifter, air box, fender supports, motor mounts, etc. You pay shipping.:beer:beer

[ironchop]

Bump.

Lots of cool stuff for grabs. Great for ppl on a budget.

[tripledog]

I have 2 exhaust pipe heat shields for a 1984 Big Red. One is nice, the other is decent. Yours for the cost of travel expense to your locale. Pics to follow.

[ironchop]

Ive got a decent 125M fuel tank with cap for an 85 no big dents or leaks mostly rust free outside clean inside. Pics on request.

I also have an 85 125m bottom end and hilo box for whole or parts

an XR250 fuel tank, perfect seat, and a bottom end, swingarm

Just pay shipping on certain items and pay it forward and its yours


EDIT: CR parts motor spoken for, XR shock spoken for, Supertrapp spoken for

[onformula1]

I don't think there are any rules per say, so bike stuff is ok?

I have some nice older bike stuff for anyone that has a 3 wheeler cousin.

I am asking because you can't in the classifieds or am I wrong on that too?

Sent from my SM-G386T1 using Tapatalk

[ironchop]

I hope it`s ok....I got a lot of bike stuff in my post.....I got no use for it anymore so I listed that stuff too

[Mr. Clean]

I don't think there are any rules per say, so bike stuff is ok?

I have some nice older bike stuff for anyone that has a 3 wheeler cousin.

I am asking because you can't in the classifieds or am I wrong on that too?

Sent from my SM-G386T1 using Tapatalk

I see no issue with bike stuff and the only rules are to pay it forward!! If the mods do not want it they can step in. I know lots of trike owners who have two and four wheelers and surely bike or quad stuff could be modified to be used on a trike.

Ironchop's intent is bringing goodwill to the trike community and 3WW as a whole, so post it up!!

[onformula1]

So we are the same page I didn't have any problems with ironchop, he's great.

Just checking, I didn't want to spend a couple of hours in my hot attic going though stuff and taking pictures only it have it deleted.

Sent from my SM-G386T1 using Tapatalk

[Mr. Clean]

I am asking because you can't in the classifieds or am I wrong on that too?



"Rule #1 ( Allowed Rule ): The 3WW Classifieds is limited to ATV related items only ( This is a 3 Wheeler Web Site ). Things that are allowed: 3 Wheelers, 4 Wheelers, Dirt Bikes, snowmobiles, and items related to such machines ( atv magazines, atv models, atv clothing, atv protection gear, ATV trailers, ect ) . "

You can list and sell Dirt Bikes and items related to them in the classifieds, and its not that HOT in Surprise...........yet :)

[onformula1]

True Mr. Clean, but my garage has A/C. LOL

Sent from my SM-G386T1 using Tapatalk

[RIDE-RED 250r]

You guys and your AC down in Surprise AZ.. My woodstove was running 2 days ago! LOL! :D

[Mr. Clean]

You guys and your AC down in Surprise AZ.. My woodstove was running 2 days ago! LOL! :D

Friday forecast for Surprise is 100 degrees. It is no big deal, I am prepping for global warming :)

[tripledog]

You guys and your AC down in Surprise AZ.. My woodstove was running 2 days ago! LOL! :D

Mine has been burning every day since last October...

[onformula1]

Gone!

Up on the block for "Pay It Forward"

Made by- Cycle Am Team USA, they made gear, fork boots and plastic pieces, ETC. back then, pretty rare compared to the big gear companies back then.

Vintage Honda ATC pit jacket (Or it could be used for a riding jacket) It's from about 1980-1982 or around that time. Bought in the summer at Accessories & Cycles Unlimited. (Very cool shop back then) My Mama got a deal, being summer and all in Arizona. By the time it was cool enough to wear it was- Big Boy in a small jacket. :lol:

So, it was not used, 33-35 years later it comes out of my closet. The jacket is near mint, with a bit of yellowing on the white otherwise it would be mint. (I remember it being pure white, maybe not) Anyway it's sweet. The back is all red with a 4"-5" blue strip across the top. This is a KIDS jacket, size is a kids small, and boy it looks small. Vented sewn liner, nice quality buttons.

I know it will fit in a USPS flat rate box which is $17.90 in the 48 states. I may be able to put it in a smaller box for less?

Pay It Forward, cost of shipping only. Thank You for putting up with my rambling, I got caught up in the memories, it's amazing what you can remember if you try. :lol:
I don't want to EBAY it, much rather see a child use it. IMHO, the picture looks worse than in person. Can you iron nylon?

215446

[ironchop]

125M tank is now spoken for.

Half my list is gone.

My garage clean has been successful so far

bump it up!

[atc300r]

I have an entire first gen 200x bottom end with crank...no piston, no top-end. I can take pictures upon request. Just acquired this and have no use for it.

If you pay shipping and PAY IT FORWARD within this thread, its yours.Could you post a couple pics .Thanks DP

[jakeesspoo]

I have a straight rear axle for a 1982 200e also a nice set of forks for a 82 200e (the shocks seem to be good, could use new boots if your picky) Also have a nice 200x frame.... not sure how I would ship the frame... Also have a 200 e gas tank but its pretty rusty inside but no dents... more stuff to come...

[jakeesspoo]

Forks are spoken for

[sledcrazyinCT]

Bought this KEYSTER kit for stock carb 81-82 250R. It comes with a 150 main. never opened the package part# KH-0181. Here is a file photo 216035

Fits CARB honda part# 16100-961-004

I can ship free in lower 48, otherwise contact me if outside the US.

[atc300r]

Thought Id bump this up.

[jrwebb8324]

I have a good 1985 Honda 250es frame that someone can have for the shipping cost. Just the frame, no swinger. Good frame no breaks. Not real sure how to go about shipping it, but if someone needs it, we'll figure it out.

[ironchop]

jakeepoo I need your mailing address.

This tank has been boxed for a week but I don't have your address. Check your PMs.

otherwise, BUMP* for some good parts here still up for grabs.

[Stingray]

84 200X frame with triples, wire harness and airbox. Swingarm and usable shock. Frame looks staight. Shock is solid and has compression. Just need to pay shipping and its yours.
217093217094217095

All the parts have been shipped off to Keith Salyer.

[ironchop]

Bump.

I'm case nobody noticed, there is almost half of a 200X up for grabs in a few different posts.

Jussssssss sayin

[ironchop]

bumpski

Please take some time to look over all the posts. These trike parts need a good home. Will they ever feel the warm loving embrace of a shadetree mechanic with nary a dollar left to his name and even less left to lose? Will these parts be relegated to the Scrap Heap of life? Cast aside and cast asunder like so much chinese quad garbage?

you ask "But Iron, how can I make a difference in a trike`s life what with so little cash?"

"it`s simple!", I say. "Just open your heart and your home to these foster parts and adopt a needy airbox today. Give that frame a second chance at life and happiness. Let that axle spin free and straight!"


"give those trailpros another 36 years of hard service."

Just .32 cents a day could mean the difference between trash and treasure

For the price of a simple cup of coffee (for a month....or two), you could pay the shipping for these abandoned trike parts and give them the loving home they deserve.

Obama Version: "Come and git yo free stuff!"

take some, leave some. Redistribute the Trike Wealth.

It`s for the children....

go on and make a difference today.....claim your ATC fender and forks!

[yaegerb]

bump for the 200x bottom end I have. If nobody wants it I am tired of tripping over it and it will soon have my time and labor into the dismantle and I will start selling parts. Please let me know if you want the 200x bottom end. If there is interest I will take pics.

[ironchop]

bump for the 200x bottom end I have. If nobody wants it I am tired of tripping over it and it will soon have my time and labor into the dismantle and I will start selling parts. Please let me know if you want the 200x bottom end. If there is interest I will take pics.

you coming to TF?

[yaegerb]

you coming to TF?

Unfortunately no, got your text though, Doug and I will get a quote for you.

[83ATC185]

Tank still available, seat still available, trailer hitch spoken for.

[captainweezy]

[QUOTE=yaegerb;1372867]Unfortunately no, got your text though, Doug and I will get a quote for should have called me. I would have gotten it for ya doug.

[ironchop]

[QUOTE=yaegerb;1372867]Unfortunately no, got your text though, Doug and I will get a quote for should have called me. I would have gotten it for ya doug.

that's ok. Thanks for offering though Shane

save us a spot. See you Sunday or Monday!

[R-N-D]

I have a rim that is in great condition, freshly powder coated as well. Unfortunately, I do not know what it fits. I thought it would fit my 84' 200es but it didn't. Of course, I found this out after having it powder coated. It is obviously a 4 bolt with looks to be a 4" spread between the holes. Pictures tell the story but it measures 10" in diameter and stands 10" in width. Honestly, all I know but take a look. Yours for the simple cost of "Paying it forward" as the thread states. Within the states, I'll pay the shipping since it's only around $10-15 I assume. Anywhere else, shoot me a zip or postal code and I can get a quote. Thanks.

If anyone wants this and will be at TF, I'll bring it and you can have it. Let me know, PM me. I'll be there Friday they Sunday. Also have a trunk for an 85' 250 ES but it has a home in it. Kinda like it melted at some point. Want that, I'll bring that too. Thanks. Pictures of the rim are in my original post.

[R-N-D]

I'll be bringing some miscellaneous parts to TF. Should be there around 11 or so today. I'm just going to set them up on our trailer with a "FREE" sign next to it. Unknown Year or Trike Rim, freshly powder coated, some miscellaneous 85' 250R parts, 85' SX bars, 85' 250es trunk (beat up but yours for the taking), and some other little odds and ends. Take it all or none. Regardless, "Pay it Forward" as the thread states. Hope to see you guys out there. Be safe.

By the way, saw a couple of guys on the expressway yesterday (I-294) from Antioch headed to TF. Stuck in all kinds of traffic. Hope you made it safe.

[muthey]

I am putting out a dibs on the first 1985 250 sx airbox that shows up please, I am running a pod filter, and I would love to be able to blast through water without drowning the motor. I still have everything but the ytm 200 headlight shell still available. I will have an almost complete atc 70 4 speed up for grabs soon

[Toaster556]

Have a big bore cylinder that will suit a Honda 50 or 70 from a messed up eBay order, no piston. Brand new, in the box with shipping oil still covering it. Dr ATV sells a piston to match HERE (http://www.ebay.com/itm/52MM-88CC-BIG-BORE-PISTON-KIT-ATC70-MOST-CT70-XL70-ATC-CT-XL-SL-CL-70-100042-/380570225789?hash=item589bc0cc7d&vxp=mtr) on eBay for a cheap ATC 88 kit. Since shipping from Canada will be killer, I'll kick in on it a bit, just pay it forward.217642217643217644217645
If I can track down all the pieces in my carb box, I'll also toss in a 110 pit bike carb that I ran on my pit quad for a while. No numbers on the jets, but it should be a good match for an 88 kit

[R-N-D]

I'll be bringing some miscellaneous parts to TF. Should be there around 11 or so today. I'm just going to set them up on our trailer with a "FREE" sign next to it. Unknown Year or Trike Rim, freshly powder coated, some miscellaneous 85' 250R parts, 85' SX bars, 85' 250es trunk (beat up but yours for the taking), and some other little odds and ends. Take it all or none. Regardless, "Pay it Forward" as the thread states. Hope to see you guys out there. Be safe.

By the way, saw a couple of guys on the expressway yesterday (I-294) from Antioch headed to TF. Stuck in all kinds of traffic. Hope you made it safe.

I took this all to TF and gave it all away. Told people it was FREE and if you look, you have to take at least one thing. They laughed but they obliged. Everything went. Hope they "Pay it forward" as I had asked of them.

[onformula1]

Bumpy, Bump!

Let's keep it going, digging for stuff as I type.

[Keith Salyer]

I need to thank Stingray for the 200X frame and accessories, It will soon be a winter project. Thanks a million...

[yaegerb]

I have a set of first gen 200x OEM fork springs boxed up and ready to go. You pay shipping and pay it forward and they are yours.

[AK47KID]

Can someone explain how this works as far as what "pay it forward" is? Thks

Sent from my SM-G935V using Tapatalk

[yaegerb]

read from the start of the thread. In a nutshell, you offer up parts for free and either you pay shipping or the buyer pays and then you offer any items you have for free to someone else.

[AK47KID]

read from the start of the thread. In a nutshell, you offer up parts for free and either you pay shipping or the buyer pays and then you offer any items you have for free to someone else.
K, thanks for clearing that up.

Sent from my SM-G935V using Tapatalk

[Mr. Clean]

I have a OEM TRI Z Gas tank with brackets, cap and hardware. Have had it for a couple years and have zero use for it, tried to sell it and could not, I cant bring myself to throw it away.



Tri-Z tank and hardware has been thrown away, could not give it away.


I have some 110 parts I will give away next, front forks, hubs, seat latch. Pics later.

[onformula1]

I need a straight fork

Sent from my SM-G386T1 using Tapatalk

[Ol Deuce]

Tri-Z tank and hardware has been thrown away, could not give it away.


I have some 110 parts I will give away next, front forks, hubs, seat latch. Pics later.

I'm Looking mike:D:Bounce:Bounce:Bounce:Bounce Ol Deuce:crazy:

[RubberSalt]

I'll rewind some Tecate Stators, for free if anyone needs :)

[Mr. Clean]

I need a straight fork

Sent from my SM-G386T1 using Tapatalk

How about a slightly curved spork?

[onformula1]

We have a very nice 1984 125M, but the fork looks like it jumped the Snake River.

Sent from my SM-G386T1 using Tapatalk

[Jmoozy27]

We have a very nice 1984 125M, but the fork looks like it jumped the Snake River.

Sent from my SM-G386T1 using Tapatalk

Dude, I'm pretty sure I have a very decent set from my 85 125m, I'll send them to you after Memorial Day. I'm about 50 miles offshore right now so I can't send them until I get back.

http://www.3wheelerworld.com/attachment.php?attachmentid=232157&stc=1

[yaegerb]

With the oem first gen fork springs I also found an excellent condition 200x first gen flywheel. The flywheel is also available if you pay shipping. If you are building a racer I can lighten the flywheel before sending it free of charge.

[AK47KID]

Anyone have a 200es pullstart they'd part with? Mine is trashed and I can't find a rebuild kit on evilbay

Sent from my SM-G935V using Tapatalk

[Thorpe]

ODI rouge grips! Used, but in good shape, identical to these, but with aluminum lock rings... Had to change things up on my project due to new bars that won't accommodate my internal grip heaters, so these are up for grabs... Had a set on my BR, SX and Canned Ham, love them, pisses me off I can't use them! 7/8" bars, for a thumb throttle... Also have a set of internal heating elements for 7/8" bars if anyone is interested...

http://odigrips.com/store/atv/atv-products/rogue-atv-lock-on-grips-120mm

[Mr. Clean]

ODI rouge grips! Used, but in good shape, identical to these, but with uliminum lock rings... Had to change things up on my project due to new bars that won't accommodate my internal grip heaters, so these are up for grabs... Had a set on my BR, SX and Canned Ham, love them, pisses me off I can't use them! 7/8" bars, for a thumb throttle... Also have a set of internal heating elements for 7/8" bars if anyone is interested...

http://odigrips.com/store/atv/atv-products/rogue-atv-lock-on-grips-120mm

I will take them!! Thanks Thorpe!!

[yaegerb]

I will take them!! Thanks Thorpe!!

Damnit Clean!!!!!! you beat me to it!!!

[RIDE-RED 250r]

That's what I call.. a "CLEAN" getaway! LOL! :beer

[Mr. Clean]

That's what I call.. a "CLEAN" getaway! LOL! :beer


Damnit Clean!!!!!! you beat me to it!!!

Everyone had an hour and eighteen minutes to claim the grips :Bounce:beer :w00t:

[Thorpe]

Mr. Clean started this, time for the payment to come full circle!

[yaegerb]

Everyone had an hour and eighteen minutes to claim the grips :Bounce:beer :w00t:

Ugh....I was in a 2 hour meeting. Love me some ODI's. I would have an extra set sitting around just in case. Best grips IMO. Thorpe timed that Shiite perfectly.

[efhondakid]

I'll be watching this. I got some stuff laying around in sure some of y'all could use.

[RIDE-RED 250r]

I have ODI on both of my Rs and the wife's 350x, love those grips.

[Mr. Clean]

So I got my hands on the grips :lol:. Thanks Thorpe, going on my nick 500.

I will find something to throw back in the blender.

[Dirty200]

ive got my ex wife. ill pay shipping

[danbur55]

ive got my ex wife. ill pay shipping
Think your asking too much. LOL

[big specht]

Unless she has a bad cough and a high life insurance pay out it thing we would be screwed like you did! Lol

[RubberSalt]

Does she know how to change brakes or tires? Can she cook? My dad may be interested.

[Velislide]

I've got a brand new set of 200x EBC Clutch springs, I ordered accidently. If anyone needs them, pay shipping and they are yours. I doubt I will ever use them for anything.

[axeman24]

ive got what's left of a garage kept 84 200s parts bike
rear fender one break but usable
CLEAN frame (bad axel no tree)
near mint oem seat
handlebars
front break lever

first gen 200x
lower end case pieces

ive got more random 200x and s stuff Im sure

needs
200x airbox
200x breaks full systems except disks
big tires

[jonolanracin]

I have a couple of the aluminum thermostat eliminators they came with a z i bought but id rathet have my temp light work so i wont use it

[tommerp]

If you still have one left, I'll take a Z thermo eliminator, Jonolan!

PM me if you still have one....

[muthey]

I am looking for a tri-z tank just found out my cap mounting bracket broke, I saw you threw yours away mr clean. makes me sad because now I need it:(:(:(:(:(

[axeman24]

2oos parts have been sold locally
200x engine parts are still available if anyone needs them

[tommerp]

Hey Muthey - Still looking for a Tri-Z tank? I have one I just got on a POS parts bike that I can send to you. Hit me up.

[OldNo437]

ive got a bin of "mostly" air cool R engine parts. also got a bunch of Suzuki dt75 3 cylinder parts. and a wheel and tire, holds air. come get it.. not shipping.. crap load o parts if anyone wants em... i need the room..

[Hopper055]

I am putting out a dibs on the first 1985 250 sx airbox that shows up please, I am running a pod filter, and I would love to be able to blast through water without drowning the motor. I still have everything but the ytm 200 headlight shell still available. I will have an almost complete atc 70 4 speed up for grabs soon
Are you still looking for your airbox? I have one but I'm not sure what year it is. It came with my 250es needless to say I have no use for it. I'll pm you some pictures if your still looking.

I'm looking for :
200x exaust
200x cam

[tommerp]

Hey Muthey - I got your parts today - Look good! You should see the Tri-Z tank in the next couple days

Cheers

[R-N-D]

Some 85' 250R parts for someone in need. Parts are listed within each picture. Let me know what you are interested in, one piece or all, they are yours. All I ask is that you pay for Shipping. Give me a zip code and I'll see what it would costs. No longer have the R so I don't need the parts (Some of the parts I have a few pics of so I do not have doubles like it may seem). Or, I'd trade for some 250es parts if you have them. Let me know what you have. Thanks.

[atc300r]

Some 85' 250R parts for someone in need. Parts are listed within each picture. Let me know what you are interested in, one piece or all, they are yours. All I ask is that you pay for Shipping. Give me a zip code and I'll see what it would costs. No longer have the R so I don't need the parts (Some of the parts I have a few pics of so I do not have doubles like it may seem). Or, I'd trade for some 250es parts if you have them. Let me know what you have. Thanks.Im interested in all the parts.zip 13619 .

[MPDano]

great idea! I am restoring a 1985 250SX if anyone has any parts, it would get a good home.

[R-N-D]

Im interested in all the parts.zip 13619 .
Looks like around $7.00.

Sent from my SM-G930V using Tapatalk

[atc300r]

Looks like around $7.00.

Sent from my SM-G930V using Tapatalk
PM me your address I will mail out a postal money order.Thanks DP.

[R-N-D]

Will do.

Sent from my SM-G930V using Tapatalk

[R-N-D]

Parts are gone to atc300r. Keep it going...

Sent from my SM-G930V using Tapatalk

[atc300r]

I have some other parts but Im starting with these 350x fork boots. decent for a rider.236964

[Dirty200]

atc 300r- DUDE!!!!!!! those will look very pretty on my rider :) if theyre still up for grabs shoot me a pm

[atc300r]

I sent you a pm.
atc 300r- DUDE!!!!!!! those will look very pretty on my rider :) if theyre still up for grabs shoot me a pm

[Dirty200]

300-appreciate that brother!!

as for my contribution Ill start with 200s rims. front, rear, whole set what ever you need. previous owner rattle canned them. will get some pics soon

[The_Steve_Man]

I have a brand new motion pro twist throttle cable with cap for a stock 86 250r carb. Someone have it for shipping cost.

[atc300r]

Interested if no one else is. My zip code is 13619.Thanks DP
I have a brand new motion pro twist throttle cable with cap for a stock 86 250r carb. Someone have it for shipping cost.

[conbon]

ive got a bin of "mostly" air cool R engine parts. also got a bunch of Suzuki dt75 3 cylinder parts. and a wheel and tire, holds air. come get it.. not shipping.. crap load o parts if anyone wants em... i need the room..

If you're going to do pick up only could you list location or update profile to show location, thanks.

-Connor

[sledcrazyinCT]

If you're going to do pick up only could you list location or update profile to show location, thanks.

-Connor Member lives in MASS

[axeman24]

dirty200 I could use those rims for sure I have hubs and tires

I still have a bunch of 200x first gen engine parts mostly everything except internals

[atc300r]

These fork boots have gone to Dirty200.
I have some other parts but Im starting with these 350x fork boots. decent for a rider.236964

[Dirty200]

These fork boots have gone to Dirty200.

you da man brotha!! working with Axeman on the rims

[6spdls1z28]

Looking for tri z parts

[badass350x]

What you looking for?

[muthey]

so this spring I am going to do some cleaning out of parts, there will be some ytm 200/225 stuff honda 90,110,125 stuff, and some 81 250r parts as well, I haven't been on much lately. but I still periodically check in to see whats new., If anyone has a need of parts from any of the machines list feel free to ask if I might have what you are looking for and I will check.

[vroomy]

Hi muthey, dont suppose you have a one piece alloy front wheel for a 90/110 honda? Happy to pay

[6spdls1z28]

What you looking for?

Anything really

[muthey]

I don't have any alloy, all I have is steel sorry

[conbon]

350x front hub, couldn't tell you if it's '85 or '86, but I can tell you it's not the same offset as a 3rd gen R hub so it's no use to me. All studs good, got a chunk missing on non-brake end but it still holds seals in just fine, comes with center spacer but no bearings/seals

Got a N/C tether I accidentally ordered, my 250r and 350x both required N/O so no use to me

-Connor

[conbon]

I could really use a 3rd gen R fork cap, the actual aluminum cap not the rubber trim piece, will to barter/pay

-Connor

[R-N-D]

I have a rear brake caliper off of an 85' 250r that needs attention. One bolt sheared off, one was attempted to be drilled out. Not sure if it's any good or not. Yours for the taking, just cover shipping. Send me your zip and I'll get you a shipping quote.

Sent from my SM-G930V using Tapatalk
https://uploads.tapatalk-cdn.com/20170215/22931163398e72631587bae9d0eeb520.jpghttps://uploads.tapatalk-cdn.com/20170215/65f04a9510801eb9af9266050425c450.jpghttps://uploads.tapatalk-cdn.com/20170215/74bcdd30b5b0be27a588061bac5ee45c.jpghttps://uploads.tapatalk-cdn.com/20170215/8b8ba10e62dc8216338bd5b1648dcc55.jpg

[nstyle73]

One FREE 1985 Yamaha Tri Z OEM yellow fork boot, no rips, just cover shipping.

[efhondakid]

R-N-D the sliders move on that R caliper? 44705

[R-N-D]

It's spoken for at the moment pending shipping charges.

Sent from my SM-G930V using Tapatalk

[ctk]

Looking for a first gen 200x handle bar. Doesn't need to be oem but oem controls must bolt up.

[Newrider]

I have one ,it doesn't apear to have ever been bent , I just got the renthol vintage desert bars so if you want my old set I can send it but not till this coming Friday just pay shipping

[R-N-D]

Rear brake levers (2)

Master Link Brand new (Believe it was for an 85 350X)

First one I'm not sure what it is off of (Chrome-1st set of pics)

Second One off of an 85 Big Red (2ndset of pics)

Any or all of them for FREE, just ask that you cover shipping. Send me your zip and I can get you a quote. All payments please use Paypal via Friend/Family please.

[R-N-D]

Nobody interested? Otherwise, junk pile for garbage day next week I guess.

[Jaywood1207]

Rear brake levers (2)

Master Link Brand new (Believe it was for an 85 350X)

First one I'm not sure what it is off of (Chrome-1st set of pics)

Second One off of an 85 Big Red (2ndset of pics)

Any or all of them for FREE, just ask that you cover shipping. Send me your zip and I can get you a quote. All payments please use Paypal via Friend/Family please.

Any idea if the foot peg will fit a 1986 250SX?

[R-N-D]

Sorry, I don't know that. Plus, they are spoken for. Thanks.

Sent from my SM-G930V using Tapatalk

[R-N-D]

And they're gone! Thanks guys.

[Merge_88]

And they're gone! Thanks guys.


Since I was fortunate to be the recipient of the R-N-D pegs, I'd like to offer up a good useable Big Red trunk lid.
Cover the shipping cost and it's yours!

244920

[Super350]

I'll take it! i'll pm you

[muthey]

time to boost this back to the top along with I am looking for two things to finish my wifes 1983 185's. I am looking for the motor chainguard and the outer rear chain guard with clips. I do have a 185's/200's front rack I believe hondaline, and a headlight riser also honda line. plus a pulse generator plate and a header, front hub and forks all for the same machines. here is a pic of the rack and headlight raiser.245020

[dman10]

Are any of those decals for a 185s?

[jeswinehart]

Are any of those decals for a 185s?

there all gone

[hublake]

I will take the second picture.

[R-N-D]

Shipping will be expensive with that one. I guess you can crate him.

Sent from my SM-G930V using Tapatalk

[Bren_downe]

Found this stuff rotting away in my shed. 200s muffler spark arrester intact. 2 200s head pipes.
1st gen 200x foot pegs. Bent, welded and broken.
Just pay shipping and they're yours.
246627246628246629246630