TerryCable Dual Gasser Throttle Assembly

[dieseldigger]

Has anyone tried one of these? sounds like a great idea. just curious about the pull and twist ratios and usability before i lay down that kinda money.

[TrailerRider]

Cool idea but seems like an accident waiting to happen if you ask me.

[dieseldigger]

Cool idea but seems like an accident waiting to happen if you ask me.

How is it an accident waiting to happen?

[HairyJR]

I've been using one on my "Hybid Quad" for several years now and love it. The thumb throttle is a little longer than stock and easier to push. There's a pin to lock the twist side from rotating, when pulled the twist side has a little more resistance than a "Magura" as the short cable pulls around the wheel. I'm going to buy another one soon for my XR500 3 wheeler....here's a couple pic's with the top cover removed.

"HJ" :beer

214591 214592 214593 214594 214595

[NeverLift]

I've been using one on my "Hybid Quad" for several years now and love it. The thumb throttle is a little longer than stock and easier to push. There's a pin to lock the twist side from rotating, when pulled the twist side has a little more resistance than a "Magura" as the short cable pulls around the wheel. I'm going to buy another one soon for my XR500 3 wheeler....here's a couple pic's with the top cover removed.

"HJ" :beer

214591 214592 214593 214594 214595

Hairy,
What size carb do you have on that quad? I've always wanted one of these but wasn't sure if it would open a 38mm pwk all the way. I run a 400ex thumb throttle and had to grind out some material for it to open enough.

[HairyJR]

NeverLift,
It's a Mikuni "HSR 45" carb that I machined a plastic cable rotating wheel and bolted it to the left side, normally right side mechanical linkage. Before that I had a 40mm Dellorto carb running alcohol with no problem.

214600 214601 214602