PDA

View Full Version : Are there any kickstarters that interchange with a 350x?


Zach
04-08-2015, 07:27 AM
Or was that kick started not used on any other bikes?
oscarmayer
04-08-2015, 08:51 AM
what are you trying to accomplish? I am sure there are several that can fit it, just none I have personally tried outside the stock setup. for my desert racer, I'm thinking of cutting and welding in an extension of 1" to have to just slightly longer to make it a little easier. The 350x comes with a decompression cable that runs off the kicker assembly. if that is not working or removed, it will be hard to kick over. find the parts and make that work to resolve your issue is that is what your after. If you just need the kicker, well, ebay.
Zach
04-08-2015, 11:02 AM
My entire kickstarter is worn out at the joint I just need a whole new kickstart lever. I have been all over Ebay for the past month. I saw one when I first looked I think it was about $80 I thought I could just wait and find one better, bt no luck so far. Was hoping maybe the same kickstart lever was used on another ATC
Onetrackmind
04-08-2015, 11:41 AM
ServiceHonda shows that assembly (Honda part # 28300-HA5-000 ARM, KICK STARTER) as being exclusive to the 85-86 350X. You might try try taking your caliper and measuring the diameter of the spindle then reporting back. Maybe it's spindle is the same diameter as another more common spindle. FYI, they also show your spindle (28250-HA5-000 SPINDLE) as being a 350x exclusive as well.
oscarmayer
04-08-2015, 11:51 AM
Ya may be stuck. :(


Sent from my iPhone using Tapatalk
atc500x
04-08-2015, 12:46 PM
pretty sure the 250sx-es fit on the shaft......but also sure it will not clear the fender
jb2wheels
04-08-2015, 03:22 PM
Any MC kicker will likely flip the wrong way - making substutions hard.
shortline10
04-08-2015, 03:52 PM
These work as well as trx300 fourtrax kickers which are very inexpensive on ebay .
pretty sure the 250sx-es fit on the shaft......but also sure it will not clear the fender
Dirtcrasher
04-08-2015, 06:34 PM
These work as well as trx300 fourtrax kickers which are very inexpensive on ebay .

Numerous kickers fit the 350X.

The unobtainium 87 200X kicker also has substitutes I found:naughty: