View Full Version : 250r front fender on a 350x
6spdls1z28
03-30-2015, 12:17 PM
I see people putting them on 200x's or 350x ones on them but I've never seen a 250r one on a 350x. I've searched but haven't found anything. If someone has it post a pic.
6spdls1z28
03-30-2015, 02:32 PM
Anyone? Someone has to have done it before.
Mr. Clean
03-30-2015, 02:38 PM
The 200x is a direct swap. The 350x if I remember correctly requires an adapter bracket to swap. Sorry no pics.
Mike D.
Jmoozy27
03-30-2015, 02:56 PM
213363
You will either need to drill new holes and put spacers like I did, or machine some type of bracket.
6spdls1z28
03-30-2015, 03:34 PM
I'm still looking to see it on a 350x thanks for the pics tho.
6spdls1z28
03-30-2015, 03:42 PM
I see what you mean the 250r one has those bumps on each side where the 350x one is pretty much flat. So I can see making a bracket or new holes.
Jmoozy27
03-30-2015, 04:42 PM
I'm still looking to see it on a 350x thanks for the pics tho.
The pic I sent is an 86 200x front end w/ a 250r fender. The 350x triple has the same fender bolt pattern as the pic I sent you.
Dirtcrasher
03-30-2015, 07:15 PM
It's not the humps, they are both flat where they mount. It's just the bolt pattern.
If I were to make an adapter, it would have flat head screws on the bottom to keep it all flat using the 350X holes. Then drill the 250R holes in the plate and tack weld some nuts on top.
Aluminum would be sweet but painted or PC'd would be fine as well.
I'd rather make 10 of these than the never ending labor intensive headlight guards I'm half done with.....
6spdls1z28
03-30-2015, 09:43 PM
Thanks for the replies guys I was just wanting to try something different on my 350x.
oldskool83
03-31-2015, 03:14 PM
all the Honda sport 3wheeler fenders are the same bolt patterns. ive owned all of them and put 250R fenders on all.
6spdls1z28
03-31-2015, 09:18 PM
But like said above ill have to put spacers? Was also told I'd have to drill holes.
oldskool83
04-01-2015, 12:17 PM
you don't need to drill new holes. buy a pre drilled one. If this is too much for ya I'd say save the $20 and invest it for later use on something else. Not a hard bolt on mod.
oldskool83
04-07-2015, 03:46 PM
http://www.3wheelerworld.com/showthread.php/173593-I-joined-the-350x-club-today
there your proof photo
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.