Master link installation tool video

[Scootertrash]

There is a previous thread floating around here about how to get your master link on an o-ring chain easily and successfully. I said in that thread that I would post a vid the next time I used it, so here it is. This was a DID X-Ring chain:

Here is the tool:

212279

http://www.jpcycles.com/product/6000365?adpos=1o1&creative=44525597410&device=c&matchtype=&network=g&cid=Google+SEARCH+NON-BRAND+PLA+-+Shopping+Campaign+%28Low%29&gclid=CKHlqLzgq8QCFVKAaQod1VEANA

And here is the vid:

https://www.youtube.com/watch?v=--cWxXb60m4&feature=youtu.be

[ironchop]

you forgot the part where that little clip goes flying under the workbench and you have to lay on the floor and find it with a flashlight and a coat hanger with a magnet on the end......or better yet........ trying to find it in the tall grass you wished you had mowed the day before the clip fell into it.