i have a yamaha 200 chain drive

[daddy420big]

and i'am trying to get the front triple off to re do the bike i donkt have book and i took the big bolt out and the top one should come out right or am i missing some thing . thanks

[hogmuffin]

http://www.oscarmayer.net/atc/manuals/

Scroll down to the yamaha section and download "ytm200 factory service manual"

[muthey]

make sure you have either removed the forks or loosened the clamp bolts in order to get the crown off. then there is either one or two more nuts to remove in order to get the steering stem off.

[dmfaulks85]

I had some trouble getting off the top triple clamp when I did my steering stem bearings. I ended up taking the forks out and twisting the triple clamps in opposite directions a couple of times, they were corroded pretty bad, be sure to use plenty of anti seize when you resemble it.