Chinese carbs on ebay for atc70

[350Xccelerator]

Anyone purchase one before? What was your experience with it? I was looking at them for a while and noticed that some are not built the same. As in if you mount it, the petcock and hoses would run to the opposite side. These usually ran $20-$30

I ended up finding one identical to oem for about $50

[HarrisoN*]

theyre on a par with oem in terms of running and tuning just made with low grade pot metal.

for $20 theyre great and if it lasts a few years then get another.

the jets and screws do round out after a while because of the low quality metals used but I think oem jets fit

also see your from the bay.

[86125m]

these wincycles carbs are really good Ive put them on two of my bikes and I have no complaints they are bolt on adjust the idle and go. They take the stock jets and the jets are made in japan. http://www.ebay.com/itm/Honda-ATC-70-ATC70-Carb-Carburetor-1978-1985-NEW-/191426616593?pt=Motors_ATV_Parts_Accessories&hash=item2c91ea5d11&vxp=mtr. they are a little more expensive than the other aftermarket carbs but id say they are worth it.

[82300R]

I GOT a couple for my 80 110's. Had to like use the stock caps an not quite a direct bolt on...But worked out o.k. Better than nothing...

[clmeue37]

I run one of those carbs on one of the 110's and the 200s. No problems yet after almost 3 years.

[legacy51]

I have only heard good things about the chinese carbs for these small engines but I do have a stock atc70 carb if you are interested.

[Ol Deuce]

I buy from ZOOM and have not had any trouble with the carbs! most I use are from Japan !!!! good stuff :Bounce (7 so far):Bounce ;)