View Full Version : 200x .. xr200 head ....
short4stuff
01-13-2004, 10:27 PM
will this bolt on a 85 200x cylinder?? I thought they stopped making the xr200's in like 87 or some wheres aroudn there ??? 2001 ... ?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=35595&item=2453651385
Also I though the whole idea of putting the xr head on the 200x was for the 4 valves?? This one only has 2 ... ?
davham
01-13-2004, 11:26 PM
Yes it will bolt on. An XR200 with four valves.........I dont think so. That engine has pretty much been the same since it's birth. I belive it was discontinued last year and replaced with the CRF230F. There was a XR200R way back(84-85 maybe) that had a four valve head with a twin carb setup and was only made a few years before going to the two valve single carb design that your X has. There was an XR200 and a XR200R at the same time and the 200R four valve head was dropped for the 2 valver and been pretty much the same since. My guess It would be pretty darn tuff to put the twin carb, twin header, four valve head engine in your X. I just might be wrong about all this but I think I'm pretty close. It was a long time ago.
weaseljeep
01-13-2004, 11:46 PM
i just put a xr200r head on my 85 x and it fits fine. also it is a 2 valve. the heads are the same except the r head has a hotter cam and supposedly stronger springs.
weaseljeep
01-13-2004, 11:55 PM
i just put a xr200r head on my 85 x and it fits fine. also it is a 2 valve. the heads are the same except the r head has a hotter cam and supposedly stronger springs.
samster143
01-14-2004, 11:30 AM
Powroll says the 200X has the best flow rates out of all 200cc cyl. heads. XR's have the decompression lever for easier starts w/ high compression ratios.... Less abuse to the weak kickstart gears.
speed20
01-14-2004, 01:22 PM
I believe they quit making the 2 valve xr's in 84 or 85, but the xr 200 motors are still being made today....a friend of mine has an xr200 dirtbike (2002) but its got the 4 valves i believe
davham
01-14-2004, 02:11 PM
Honda quit making the four valve 200 motor in 85. That engine was only produced for two years. From 1980-1983, two valve head just like your X. From 1984-85 four valve head.(w/dual carbs and head pipes) From 1986-2002 two valve head just like your X. The CRF230F has replaced the XR200R since 2003. If the 200 motor is still being made than what is it going in?
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.