View Full Version : ATC250R Chain Tensioner
Mr. Clean
08-13-2014, 04:49 PM
Anyone ever seen a funk-da-fied chain tensioner like this? Is it really necessary given the way a 250r chain is tensioned? :wondering
90guy
08-13-2014, 07:22 PM
Saw a NOS Bapp tensioner just like that for the 1st gen 250r not to long ago. Pretty different that is for sure.
I've always wanted to weld on a bracket and use a rear banshee slider to help keep the chain aligned.
Dirtcrasher
08-13-2014, 11:48 PM
I bet he broke a left case and didn't want that puppy to jam up again!!
Creative, as long as it works....
atc300r
08-14-2014, 07:49 AM
I made this one from spare lawnmower parts and a skateboard wheel.I can run the chain a little looser. 198955 198956 198957
Mr. Clean
08-14-2014, 02:38 PM
I bet he broke a left case and didn't want that puppy to jam up again!!
Creative, as long as it works....
Here is the 250r, pretty clean machine.
http://phoenix.craigslist.org/nph/snw/4592917705.html
BOB MARLIN
08-14-2014, 02:58 PM
I don't get it.:crazy:
I have a Cancilla piece for my Zuke that's similar
http://img.tapatalk.com/d/14/08/15/yvy6umyt.jpg
http://img.tapatalk.com/d/14/08/15/je9yjady.jpg
http://img.tapatalk.com/d/14/08/15/amy7apeh.jpg
I like it for the lt because of the idiotic carrier/tensioner set up from stock
Dirtcrasher
08-14-2014, 06:59 PM
I made this one from spare lawnmower parts and a skateboard wheel.I can run the chain a little looser. 198955 198956 198957
Nice ingenuity, is that the lower half of the chain that shows the master chain clip on backwards?? If so, flip that puppy around......
DC
cbx1170
08-14-2014, 07:54 PM
Cancilla type in first pic. Also chain is kinking junk prolly.
Crasher RH hand drive so clip may be correct
Here is the 250r, pretty clean machine.
http://phoenix.craigslist.org/nph/snw/4592917705.html
Buy it, I want the rear fenders. LOL
xrider
08-14-2014, 08:31 PM
Its a Cancilla. I have one that looks identical
Mr. Clean
08-14-2014, 08:50 PM
Buy it, I want the rear fenders. LOL
What do I charge you for the fenders? $3K?? :lol:
What do I charge you for the fenders? $3K?? :lol:
Nah, just start the price out like this guy:
http://www.ebay.com/itm/1985-86-HONDA-250R-ATC-like-new-MAIER-LOW-PROFILE-LO-PRO-REAR-FENDER-ATC250R-/271576880195?pt=Motors_ATV_Parts_Accessories&hash=item3f3b3e5443&vxp=mtr
atc300r
08-15-2014, 09:21 AM
Nice ingenuity, is that the lower half of the chain that shows the master chain clip on backwards?? If so, flip that puppy around......
DCThank you for the compliment. The clip is on the right way .I put an arrow on it to show the closed end going towards rear sprocket. This chain tensioner is designed with adjustible spring tension and the wheel can be adjusted in and out. 198981
250rRoostmaster
08-18-2014, 01:03 PM
I've always wanted to weld on a bracket and use a rear banshee slider to help keep the chain aligned.
199185199184
Kinda like this one? :D
Awesome mod and works really well!
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.