Want to put a 4 bolt hubs on my atc 90 need advice please

[Zach]

Well its time I am going to start the rebuild on one of my first trikes, I want to ditch the 3 bolt hubs and split rims. I am looking at some rear hubs on e bay for 110s. Correct me if I am wrong but any of the 100x4 honda hubs will fit my axles? Also for my front hub what will I need to replace that 3 bolt hub with a 4 bolt are there any that will bolt right on?

[Zach]

I would like everything to take the same wheels as my 350x

[blue27]

your 350x is 4x110. Any of the Honda Hubs EXCEPT the 350X, 85-86 ATC250R, TRX250R and TRX90 will fit. I do not know of any front hub with a 4x110 bolt pattern.

[Stephon_xr500]

200x hubs will fit

[Vealmonkey]

What's the reason for going to 4 bolt rims exactly? Are you just mainly trying to get away from split rims? If so, then why don't you just find set of yt125 steel rims since they are not split rims. Same bolt pattern as stock honda 3 bolt split rims. Or are you trying to accomplish something else? Or buy s set of 3 bolt aluminum rims. Why make things more complicated then they really need to be.

[Frankencelery]

What's the reason for going to 4 bolt rims exactly? Are you just mainly trying to get away from split rims? If so, then why don't you just find set of yt125 steel rims since they are not split rims. Same bolt pattern as stock honda 3 bolt split rims. Or are you trying to accomplish something else? Or buy s set of 3 bolt aluminum rims. Why make things more complicated then they really need to be.

So there ARE 3-bolt aluminum rims? Where to get those? I could use at least a front one for my 90.

[shortline10]

http://www.ebay.com/itm/Douglas-Alumilite-Polished-Sport-Blue-Label-125-Wheel-8-x8-3x100mm-BC-/201144886432?pt=Motors_ATV_Parts_Accessories&hash=item2ed52b64a0&vxp=mtr

[jb2wheels]

That's what I was thinking - that's Summit Racing.

Check the backspacing, though. Need centered for a front. Sometimes they have them and sometimes they don't. Depends on whether or not DWT made a batch recently.

[Zach]

I am wanting to do this because I have about a dozen wheels and tires on 4 bolt rims, I would like all my bikes to take the same bolt pattern wheels so when I go somewhere and take replacements I dont have to pack the whole shop. Also its nice when things are universal. I really dont think this is all that complicated, I wanted to ask before I started looking for axle spline counts and diameters, because chances are pretty good on this site someone has already done it before.

[C.J]

400EX hubs. They fit, they are 4x110 (same as 350X) and they add width to the rear (about 2")