Sleaving an 86 T3

[Enigma]

Hello I have an 86 T3 and the top end is worn out and i want to sleave it. Has anyone done this and how good does it work? Is it worth it to go to the big bore 320?

[monoxide]

Hello I have an 86 T3 and the top end is worn out and i want to sleave it. Has anyone done this and how good does it work? Is it worth it to go to the big bore 320?

don't know where you'll find the big bore kit, but if this helps any, the '86 KX250 sleeve(maybe others too) are the same.

[BigGreenMachine]

You may want to contact CT Racing. I'm having two 85 Tecate topends sleeved there. They told me after it was sleeved there were a few different bore sizes available.

[Jeb]

You may want to contact CT Racing. I'm having two 85 Tecate topends sleeved there. They told me after it was sleeved there were a few different bore sizes available.


Your using CT! Cool! let me know how it comes out.

[BigGreenMachine]

I should be getting them in the mail in a few weeks.

James

[Curtis-Tecate3]

Have a look at Wiseco.com. Once the cylinder is sleeved you have the stock bore plus 7 more sizes available all the way up to a 2mm overnore or 264cc.

Curtis.