85 tecate rear master cylinder rebuild help

[mjquadracer]

wondering if anyone knows what part number or anything for the rebuild kits. Did a search and couldn't find anything but ones for the 87 tecate. does anyone know if they work for the 85? please help ! this is a194031ll I need to start riding this rebuild again

[emmie357]

I couldn't find a rebuild kit.

Check out post #141 here:
http://www.3wheelerworld.com/showthread.php/94809-Kxt250-Tecate-3-What-Parts-Fit-Swap-Interchange/page10?highlight=tecate

A 93 kx125 rear master will bolt up, and can probably be had for cheaper. I used a 99 kx250 rear master on my 85, but did not have a stock rear master cylinder bracket, so I don't know if it's a direct bolt on (looks like it should based on the pics I have seen of the stock one). I was easily able to adapt my bracket by drilling 2 new holes in it.

Pretty much any rear master will work if you fab a bracket.

Edit: I should add, a newer model rear master is great because a rebuild kit can easily be found if needed in the future.

[3 Wheel Drive]

I got one of these for less than 20.00 shipped, I had to enlarge the mounting bracket slightly to bolt on. I'm still waiting to try it out. It's cheaper than a rebuild kit and comes with a new resivior.

http://m.ebay.com/itm/390572921676