What's is the stock length measurement of a second gen tecate swing arm??

[TatTooL23]

I have what may be a west coast swing arm for a second Gen tecate. Feels very heavy. Not aluminum. And I thought it was extended. So I wanna measure compared to stock and my two '86 tecates r not here.

Let me know. Thanks.

[just ben]

About 18" between the center of the pivot bolt and the center of the axle in the middle of the adjustment. So obviously that figure could change but should give you an idea.

[just ben]

oh and pics please :)

[TatTooL23]

Here u go ben

193608

193609

[TatTooL23]

And it measures 20 inches center to approx center.

[DohcBikes]

Yep looks like a Wescoast, or an exact copy!

[barnett468]

.
Howdy!

http://t0.gstatic.com/images?q=tbn:ANd9GcTDheK_NT7A9cIdJnV_1Pg7lGbLDWNu5 AVQnY60FToKElt_Wip72n1nHA


It looks to be a genuswine 84 - 85 Westcoast Tecate swingarm. I have never seen nor heard of a copy/replica. Photos courtesy of Jeb.

1 = tri z

2 = 84 - 85 T3

3 = 86 - 87 T3

http://www.3wheelerworld.com/attachment.php?attachmentid=12672&d=1119069587


"genuswine"...OMG!
http://www.freesmileys.org/smileys/smiley-laughing025.gif (http://www.freesmileys.org/smileys.php)

[tecaterob]

Yea looks like an 84 85 to me also.

[barnett468]

hello;

what i meant is that it is absolutely, positively an 84 - 85 t3 arm and not an 86 - 87 and that it looks to be a genuswine Westcoast brand.

[TatTooL23]

Hmm can I use it on a 2nd gen through mix matching parts? If not I'll be selling it

[3 Wheel Drive]

I'll buy it from ya if it will not work for on your trike.

[TatTooL23]

I'm Going to be blasting it and powder coating it to like new. Then I'll probably c what I can get for it.

[TatTooL23]

Does anyone know the exact length of the "westcoast" decal for the first gen Tecate swingarms?

I mean I can kinda guess from that photo above based on where it starts and stops on the swing arm.

But would like the exact. Let me know. Thanks.

[TatTooL23]

Bumppity 10