Rear wheels spacers for the atc 70

[42F67N]

do they make spacers for the atc 70 rear wheels to make it a little more stable?

If not anyone know of any spacers that will interchange with the 70?

[jdparsons1]

Did you get your carb problem fixed?

[42F67N]

yup shes running good now and my son is having a blast on it,something is wrong with the on postion of the fuel petcock bike runs perfect in the reserve postion but sputters threw the mid range when in the on postion,i tryed cleaning but it still does it,i belive its a defect in the petcock cause it wont turn all the way to the run postion.

[mymint87]

yea i've seen axle extensions offered before.. ask your local atv shop

.i think their around 100 bucks...quite expensive.....

i've never found them any less expensive...

as for stability, the help tremendiously...

heres an old pic of mine with an angle so you can see the track width

my extensions widened the track about 6"

[42F67N]

Thats exzactly what im looking for to widen the back end so it isnt so easy to flip.

100 bones is to expensive though maybe i can make some :-D

[Howdy]

Thats exzactly what im looking for to widen the back end so it isnt so easy to flip.

100 bones is to expensive though maybe i can make some :-D

I am working on making some spacers. I am sure I can beat the $100 price.
I just have to get my van and car up and running good. Hopefully the van will be done tomorrow.

Howdy

[KASEY]

years ago i had a set of spacers made ,,, a friend at a machine shop made them for me... they were round with a 3/4" wall thickness and 2.5" height ,they were made out of plastic so thet were light weight ,, you have to be careful thoo with the kids its ok ,but i bent a hub with my weight cause those stamped steel 3 lug hubs are not very strong,,,

[KASEY]

here is a spacer simular to what i had made,, these are dura blue and plastic too,,, this gives you a general idea
http://i14.ebayimg.com/01/i/01/23/91/ab_1.JPG