PDA

View Full Version : Help ID'ing front hub?



aldochina
03-31-2014, 12:03 PM
so i have this hub, thought it was 350x/250r 85+86. sandblasted, customized to fit xowner 10" wheel and painted. put new bearings in went to install it on my 350x and it was a no go, brake disk was clearly at an angle and all bound up. Upon removal, and inspection I realize it is a different hub. About a 1/4" shorter overall, and the recess for the bearing on the disk side is machined shallower than the 350x hub. I thought all the hubs that are machined down where the wheel stud is where from the later models. Maybe this is from an 86 200x? no idea, maybe you guys can help. I cant use it, so when we figure out what its for I will be getting rid of it! thanks guys
http://i674.photobucket.com/albums/vv103/aldochina/DSCN3496_zps8a6365e4.jpg (http://s674.photobucket.com/user/aldochina/media/DSCN3496_zps8a6365e4.jpg.html)
http://i674.photobucket.com/albums/vv103/aldochina/DSCN3497_zps6ab09e9e.jpg (http://s674.photobucket.com/user/aldochina/media/DSCN3497_zps6ab09e9e.jpg.html)
http://i674.photobucket.com/albums/vv103/aldochina/DSCN3498_zpsdecaaf2a.jpg (http://s674.photobucket.com/user/aldochina/media/DSCN3498_zpsdecaaf2a.jpg.html)
http://i674.photobucket.com/albums/vv103/aldochina/DSCN3499_zps5209b89c.jpg (http://s674.photobucket.com/user/aldochina/media/DSCN3499_zps5209b89c.jpg.html)
fortunately I had another hub that I had ground in the past for another studded 10 inch wheel, so I am up and running.

aldochina
03-31-2014, 12:18 PM
put the little 18's on for some sliding fun in the oh so wet grass, not sure what I will end up with in the back. See how the square front handles also.
http://i674.photobucket.com/albums/vv103/aldochina/DSCN3503_zps21e8a3a9.jpg (http://s674.photobucket.com/user/aldochina/media/DSCN3503_zps21e8a3a9.jpg.html)

bkm
03-31-2014, 12:29 PM
That looks like a second gen 200x hub.