After market clutch kit & full gasket kit - which one?

[jchale]

Doing some work on my 85 ATC250r. I see there are a few options for aftermarket kits. Any experiences or recommendations?

Clutch: EBC-DRC, Tusk or Barnett? Or?
Gasket kit: K&S, Athena or Winderosa? Or?

[Scootertrash]

I'd go Barnett on the clutch kit and I typically use Cometic gaskets, I've used both on everything from ATV to Harleys and have no complaints.

[JasonB]

Really depends on what you're up to with the build and builder preference if you're not doing the work yourself. I just did my cr500 motor (same damned gasket and clutch companies, same motor just a smidgen bigger) and used Athena gaskets but a cometic top end kit and a honda OEM center case gasket. I have heard that Tusk and Barnett clutch set ups are fine though, and a good amount cheaper than another OEM basket/disks etc.

[FastZ28]

I have an EBC clutch in my R with no problems. I think it was the Dirt digger EP or something. The EP meant it has an extra plate.
I also did the clutch update kit. I used new oem clutch springs, didn't want to use the "stonger" springs that came with the clutch kit.