Tri-Z: Changing from stock roundslide to flat-side carb help

[J.D.]

The adjuster linkage for the stock carb just slides into the top, and a c-clip holds it in place. The flat-side carb requires you to screw the adjuster in the top. How do I make this work? It seems as though I'll need to change cables or adjusters or something. Someone please help!

[Tri-Z Pilot]

Try those little adjusters on the end of bmx/mountain bike brake levers, they work, but you will need to find the right size.

[Jeb]

Goku, you may want to contact Mikuni or whoever built your carb and ask them about what throttle cable they recommend for the Z.

[J.D.]

Actually guys I figured it out! :D I found a guy parting out a 'Zuki LT250R(where this carb came from), and I'm buying the little screw-in piece, the locknut, and a cable for 10 bucks shipped. Can't beat that with a stick.

[86waterpumper]

If that cable doesn't work goku, I have a cable off a mid 90's kx, that had a flatslide keihin on it. You can have it if you want it, for a couple bucks shipping.