View Full Version : 200X Rear Master Cylinder
Flyingw
02-20-2014, 03:53 PM
I have a guy here in OK looking for a rear master cylinder for the 83-85 200X. None on Ebay as of yesterday but it occurs to me that a master cylinder off another model may work. Aren't the bodies all the same? Isn't it the rod and nipple angle that makes them different? Has anybody installed a master cylinder off another trike on their 200X?
RodKnockRacing
02-20-2014, 05:11 PM
Yeah other models will work
LTZ400 or KFX400
Kryten did a swap thread in December, and minimal mods were needed.
Heres his thread:
http://www.3wheelerworld.com/showthread.php/163324
Flyingw
02-20-2014, 05:29 PM
Thanks for the link RG, I'll pass it on to my friend.
oldskool83
02-20-2014, 06:01 PM
04-05 yzf450 quad will bolt on if you file out the holes. I did it already before.
Dirtcrasher
02-20-2014, 09:43 PM
I've put 450R rear masters on a few trikes with the lathe and some post welding.
You can count on allot of years on these.......
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.