PDA

View Full Version : Change rake on Honda ATC 70



ratedxbrad5318
12-27-2013, 08:21 PM
Im trying to fit a 190cc motor in my ATC 70... I need to increase the rake to make clearance. whats the best way to do this???

hoosierlogger
12-27-2013, 08:27 PM
I would just stretch the frame instead of bending it to change the rake. I stretched mine 2 1-2" to fit the 140 in it.

muthey
12-27-2013, 09:02 PM
are you sure the 70 frame will handle a 190cc motor, there is the option of using a 90 or 110 frame as well and putting 70 wheels on it. I know there is a 70 out there with a 250r motor in it but I seem to remember he did a ton of mods to the frame to brace it for the torque as well. Anyway if you do decide to use a 70 frame and change the rake document it and take lots of pics so others can see what improvements and things you could change to improve.

tri again
12-28-2013, 06:31 AM
Yeah, some vids on here from Austalia with tiny trikes and huge horsepower.
I should try to find that again.

KASEY
12-28-2013, 10:58 AM
here is the best way to gain clearance ,, +3 frame stretch,, it is sleeved 3 inches on bothsides inside for great strength ,, PM for details I have several different sizes in stock.

http://i1141.photobucket.com/albums/n592/KASEYII/70frame.jpg

22LB
05-21-2016, 10:12 PM
You still have the 70 sleeves

big specht
05-21-2016, 10:47 PM
Ramp it about 20 feet and the engine will eather fit real good or you will need new forks

a0gambo
09-06-2016, 05:29 PM
here is the best way to gain clearance ,, +3 frame stretch,, it is sleeved 3 inches on bothsides inside for great strength ,, PM for details I have several different sizes in stock.

http://i1141.photobucket.com/albums/n592/KASEYII/70frame.jpg


Are there any sleeves available. I want To stretch mine 70 3"