How many people have projects underway at the moment??

[Kfx-xc-racer88]

At the moment i'm restoring my 86' Atc250r about half way through, but i'm not gonna post the pics till it's done!

I've been collecting parts for about a year on and off.
parts I've collected so far are, Bill's sectional pipe, Durablue wide axle, ITP rear wheels 10", Renthal fat bars, Twist throttle, NOS Maier brake rotor cover, NOS swinging arm bolt, all nuts and bolts have been re-zinc plated, all new bearings, and lots more..


Here's a couple of pics of it the day I picked it up, it was raced when it was new.

http://i917.photobucket.com/albums/ad19/KFX450RACER88/250rtrike2_zps566f4e8d.jpg (http://s917.photobucket.com/user/KFX450RACER88/media/250rtrike2_zps566f4e8d.jpg.html)

http://i917.photobucket.com/albums/ad19/KFX450RACER88/250rtrike_zps537a5320.jpg (http://s917.photobucket.com/user/KFX450RACER88/media/250rtrike_zps537a5320.jpg.html)

And i'm 80% through building a Atk450 / hybrid quad that I've fitted with a Ktm 640 motor, and a 1974' VW Thing

[New2Tri-Z]

I am working on an 86 Tri Z at the moment, but kind of at a stand still until Klemm starts selling his big bore kits. Hoping by March I will have it all back together. Hre are some pics of where I am at so far. Lots of Powder and Billet Accessories. Should be a beauty queen when its done. Building a strictly sand machine.

when I got it
180973

As it sits today
180974
180975
180976
180977
180978

and finally my new seat from Mrs. Mosh (Thank you so much it looks great)
180979

[Mr. Clean]

A+ 70
85 ATC 250r
86 ATC 250r
84 200x MX Racer
PK70
Christmas 70
KX60 ATC
RD400 ATC

I am surely forgetting a few...

[rdlsz24]

I have this quad project going since last month. No trike projects at the moment.

http://images.craigslist.org/01414_4psxGmSLZQg_600x450.jpg

Rob

[C.J]

85 Tri-Z
85.5 Tri-Z
87 LT250R (added custom long travel front suspension, Works front shocks, new rear axle, freshening up wheel/pivot bearings, custom hood, PJ38 carb, fixing stripped exhaust stud boss threads, rebuilding rear shock, going to 4/110 rear hubs and 8" beadlocks)
2 Nicholson framed ATC110's, 1 manual clutch big bore hot motor
88 LT250R trike conversion
TT500 based trike conversion
05 TRX450R (retro-build, TRX250R scheme)
89 XR250R (It started on about the fourth kick saturday!!!!!)
oh and 2 more TT500's.

[C.J]

I have this quad project going since last month. No trike projects at the moment.

http://images.craigslist.org/01414_4psxGmSLZQg_600x450.jpg

Rob

350D!! Cant kill them!!!!!!!! But JEEZ do they ride rough!!!!!!!!!

[yaegerb]

200x flat track: Finally dialed in and screams, now it will come back apart for new kicker gears....I have officially killed the ratchet...LOL. Also hoping to get the rear sundahls reglassed at some point in 2014.
1985 250R: Looking at adding some SS brake lines, ASV levers and a magura clutch setup.

[Kfx-xc-racer88]

ooooooohhhhh!!!!!! I WANT THAT SWINGER AND CARRIER AND ROTOR!! LOL!!!

[jb2wheels]

I think the better question is - how many projects going on now...

86 350X - frame in powder coat, parts scattered around the garage
85 Red Tecate - working on some TLC (fork tubes, swinger bushings, shock)
86 TRX70 - parts showd up yesterday
8? ATC70 - waiting on a plan
85 250R - not really a project, needs carb rebuild

I thought I had a long list until I saw Mr Clean's

[Yamada]

My YTM-225DX is still apart. I'm waiting at some o-rings from Yamaha to rebuild the swing arm. I'll have to repair a cylinder base gasket oil leak.
Also I have 2 ATC 70 project. One need a carb rebuild and the other is still parked at the exact same spot when my friend Camy dropped it for me. The engine is 15 feet from the frame, the fender are in a box, etc. :lol:
And my 200X is still waiting for a complete rebuild, it run when I can start it, but the clutch is toast, the rear bearing and sprocket hub are thrashed and the kicker slip.

[Six Stroke]

Too many...

[UPNATM]

Still plugging away. Since this pic was taken I have added a front fender and some other items. Hoping to be wrapping it up soon......money permitting of course. :cool:

http://i157.photobucket.com/albums/t73/dalbey58/Honda%20atc/20130903_191212_zps084d456c.jpg (http://s157.photobucket.com/user/dalbey58/media/Honda%20atc/20130903_191212_zps084d456c.jpg.html)

[honda200xguy]

1st gen 200x HEAP
post pics eventually i dont even want to think about it right now

[MRSOUND]

Just getting started on an 82 250R refresh.....mod?
auto x scattered all over still needing parts
Been collecting NOS parts for a KLT185 for over a year, still a long way to go
Time and Money need more of both.

[The_Steve_Man]

Just finished an 85 R, kinda (it will never be finished).
Going to put together another 85 R.
Then SERIOUS plans for an 86 R.

[bkm]

I just pulled a 85 Tecate frame down out of the garage rafters.. The R has about two hours worth of work left and it's done.

[6speedthumper]

Still working on my 86 350x. Got all the gussets installed a couple weeks ago. Just got the broken exhaust studs drilled out and tapped the end of last week, and the head mailed out for porting yesterday. Also, getting a Powroll big bore kit, CWR custom ground cam, 250r front end, etc...

[hatc200x1]

1986 250es, 1983/1984 250r motocross build (just collecting parts but hope to be going on it soon after the big red is done), and a YT 125.

Its gunna be a fun winter!!!

[robertc]

Here is a little teaser.

181000

[BOB MARLIN]

181026

Just finished this 3 days ago. Next up is a '86 350x

[Six Stroke]

TT500 based trike conversion[...]
oh and 2 more TT500's.

See now, that grabbed my attention. After spending so much time rebuilding my SR500 I've come to love those engines.

[C.J]

Dude their awesome!! I haven't got to ride any of ours yet because the freshly rebuilt bike has been sitting in the woods for about 14 years. The other bike has a port/polished, 3rd over 12:1, very aggressively cammed (with hard faced rockers), engine that's never been run because the base studs won't thread down all the way. We just picked up another TT with an aluminum swingarm and good bottom end though so we will build one good bike out of the 2

[yaegerb]

Here is a little teaser.

181000

Uh...that's not fair to put such an amazing piece out there and leave us all :drool:
I hope to see a build thread on this soon......

[tripowersport]

Here is a little teaser.

181000 I can't wait to see this one robertc!

[JasonB]

split the cases on the atc500R last weekend, full engine build and probably get the frame powdercoated while its all apart. Goal of Xmas to be riding around at St Joe for a break in

[Dirtweed]

181026

Just finished this 3 days ago. Next up is a '86 350x

Bob that is really nice!!!

I always have a project going on of some sort. Only trike being worked on though is at my friend's place
as he is far better at engine rebuilds than I am. Other than that I have a LT250s quad and a John Deere 112 that
are in the process of restoration.

[90guy]

Well I have Project Child Hood fun Bandito Project needs grips and decals, But I have to wait for spring before I can apply decals. Dang you winter!
Then I have Project Left turn ATC 300r With lots of goodies Ill be putting together this winter.

[Six Stroke]

Dude their awesome!! I haven't got to ride any of ours yet because the freshly rebuilt bike has been sitting in the woods for about 14 years. The other bike has a port/polished, 3rd over 12:1, very aggressively cammed (with hard faced rockers), engine that's never been run because the base studs won't thread down all the way. We just picked up another TT with an aluminum swingarm and good bottom end though so we will build one good bike out of the 2

I just finished the engine rebuild on mine this past June after a decade of procrastination. Went with a Wiseco 10:1 88mm slug, a Web camshaft (89a, I think), and the hardened rockers + the oil line kit. I'm sure enjoying it so far, it's got buckets of torque. Finding an exhaust that didn't make it sound like a Briggs was a different challenge altogether...

[robertc]

Uh...that's not fair to put such an amazing piece out there and leave us all :drool:
I hope to see a build thread on this soon......

I am hoping to start the build after the Holidays, and will definitely start a thread. The parts acquisition has been tough to say the least. Here is one more pic of my most beloved find for the project (NOS Tank)!
181060

[Louis Mielke]

I have a BIG 'little' project under way. :naughty: http://www.3wheelerworld.com/showthread.php/162876-Something-to-look-for-at-TF14?p=1266494#post1266494

[nstyle73]

About 8 bikes, but I like that green seated machine above. My #1 project though.....

[mrtwidster1]

Here is my latest
181072

[oscarmayer]

i have 3 projects int he works.
redo of my 200x started getting parts (75% done)
get my 350x running and do a partial restore for riding (50% done)
get my 200es partly restored for use. (40% done)

[Jwmajic]

I think I got enough parts to start rebuilding the 84 ytm 225 dxl I just got to get around to starting it now.

[Canyon Man]

Still collecting parts for my 86 250es big red. Thread is here somewhere:lol: Shooting for late spring or early summer completion.:wondering

181224

[RIDE-RED 250r]

I have a lil somethin somethin going on this winter.. I have a thread started on it. http://www.3wheelerworld.com/showthread.php/162893-Here-I-go-again.-This-time-a-350x-for-my-wife!-%29

Also will be resuming more work on my 250r Resto-mod with some undisclosed pet projects this winter.. ;)

[fallguy666]

I'm in the process of stuffing a CBR 600 into a 350x frame.bout half way done

[robertc]

Here's a few more projects to come after after the Cagiva, some may recognize the first frame.

Tiger 125
181230

Tiger 250 R3
181231

[ONEBAD350X]

I have 2 projects going. 85 250R and 86 250R

http://i88.photobucket.com/albums/k196/kjgroen/20131110_110149_zpsf68f96c8.jpg (http://s88.photobucket.com/user/kjgroen/media/20131110_110149_zpsf68f96c8.jpg.html)

http://i88.photobucket.com/albums/k196/kjgroen/20130829_161313_zps5a5d88f5.jpg (http://s88.photobucket.com/user/kjgroen/media/20130829_161313_zps5a5d88f5.jpg.html)

[RodKnockRacing]

Right now Im working on Mine and Braapp's Tri Zingers Plus the 200x is still apart and the 350x could use some stuff.

[KASEY]

I am stockpiling parts for my most outrageous build yet!!!!! WOOOO HOOOOOOCRAZY!!

[R-N-D]

Been working on and off on one for about 2 yrs on an 85' 250R. Just don't have the time for it on a regular basis. Plus, 1st build and learning as I go. About 95% done I would say. Other issue is that it isn't at my place, keep it at the in-laws and get to it when I can. And, starting to collect for my next project, 85' BR.

Few before and after pics w/just the paint.

[TecateDan]

Still plugging away. Since this pic was taken I have added a front fender and some other items. Hoping to be wrapping it up soon......money permitting of course. :cool:

http://i157.photobucket.com/albums/t73/dalbey58/Honda%20atc/20130903_191212_zps084d456c.jpg (http://s157.photobucket.com/user/dalbey58/media/Honda%20atc/20130903_191212_zps084d456c.jpg.html)
Other than the trailpros ... GEORGEOUS

[TecateDan]

I have a 500 84 tecate to convert from drag to trail. A tecate 250 that needs a motor rebuild and a atc that is for my daughter who was born on the 20th

[R.J.M.]

would love to get the wife's trike redone before next spring...1987 200x
181336
needs a complete new seat and the tank is rotted out and don't know if I should put on a plastic one or go back with a metal one