Will Banshee rear hub fit on tri-z axle.

[tmhcycle]

Looking to see if banshee rear hubs will work on my tri-z. Also would the banshee or blaster rear axle, carrier, sprocket,disk assembly work on a tri-z. Has anyone tried this

[oile]

Yes they will

[New2Tri-Z]

Yes the hubs will fit the axle and you can run the banshee 4/115 wheels. Thats what most guys do to get better wheel options. I know the banshee and blaster axle will work in the Tri Z carrier. I am pretty sure if you used the banshee carrier then you can run all the banshee components (caliper, sprocket hub, rotor hub, etc..). I am not 100% sure on that though. Check out this thread as I know you can find some answers in there http://www.3wheelerworld.com/showthread.php/16277-parts-that-inter-change-with-TRI-Z-250?highlight=triz+parts+interchange

[dave ytz250s]

I think the blaster axle is shorter about 3 inches, banshee axle fits perfect that's what I have on my z, the only difference is that there are more threads for the two locking nuts on the sprocket side, the z locking nuts do fit but don't cover all of the threaded part. I used banshee nuts which are a little wider to protect the threads from damage. I'm using the stock tri-z carrier & brake assembly, sprocket hub from a blaster or banshee (not sure which), axle & locking nuts from a banshee and wheel hubs from a blaster(same as z hubs).