Atc70 front hub/wheel question!

[badass350x]

Question for the 70 guys out there. Was there ever or is there a offset on the hub or wheel on the front of the ATC 70? Haven't taking any measurements yet so thought I would ask!

[KASEY]

I have never seen one... so I think its safe to say no...

[badass350x]

I have never seen one... so I think its safe to say no...

Richard I guess my question is if the hub and wheel are both centered then the front wheel Assembly will be set farther to one side! Correct?

[Daddio]

The wheels are centered. So common sense tells me that Honda designed the hubs so that when the wheel is bolted to the hub, the wheel is centered.

[badass350x]

The wheels are centered. So common sense tells me that Honda designed the hubs so that when the wheel is bolted to the hub, the wheel is centered.

Common since? Your not answering my question!! So is the hub off set??????

[KASEY]

since the hub spacers are the same length ,and no matter what direction you put the hub on its always centered,, so YES the hub is offset

[badass350x]

Thanks for the quick response Richard! I have a new wheel and tire setup that no matter how I set it up its offset to one side! Taking some measurement's tomorrow to see whats going on, I did measure the spacers which are the same so its on to the wheel.:wondering

[jb2wheels]

I wonder if the wheel itself is either offset or actually thick (or thinner) in the hub area?

[KASEY]

just center it and cut the spacers to match. problem solved

[badass350x]

Mystery solved, It was in fact the thickness of the wheel mounting surface so it does set the wheel tire off a little to one side! anyway just got the 70 all done here are a few pics.. Thanks guys!!!







176220176221

[Daddio]

I guess we should have asked if the wheels were stock or aftermarket.

By the way........who killed the Elf?