PDA

View Full Version : Fuel petcock gasket



yamaha225dr
07-18-2013, 04:27 PM
The gasket with the four holes behind the on/off/res valve in my fuel petcock has worn out. Looking on Ebay, I found a NOS one that looks identical but it's listed for 86-89 Trx250r's and mine is an 85 ATC 250r. Will it work for my trike as well? Thanks!

Mr. Clean
07-18-2013, 04:41 PM
Yes it will work, but do not pay $10 plus shipping for an NOS one. They can be had for around $7 plus shipping, they are still available. I would get the o-ring that goes between the fuel valve and tank as well if your replacing them.

Search for these part numbers:

16955-HA2-005 for the four hole gasket.

16997-467-000 is the part number for the o-ring.

El Camexican
07-18-2013, 05:26 PM
Yes it will work, but do not pay $10 plus shipping for an NOS one. They can be had for around $7 plus shipping, they are still available. I would get the o-ring that goes between the fuel valve and tank as well if you replacing them.

16997-467-000 is the part number for the o-ring.

Good point. It’s amazing how much overpriced stuff there is on eBay that can still be bought from the dealer for half the price others are asking.

yamaha225dr
07-18-2013, 07:57 PM
Thanks guys! I was gonna check with the dealer first but wanted a backup plan just in case!