Tri-Zinger tank on Tri-Z need some help

[J.D.]

Ok wtf I can't figure out how to mount this little terd on my frame and keep my plastic on, can someone give me some detailed pics of how this works? Do I have to alter the tank to make it work? Thanks.

[200xman]

The tank just kind of sits in the frame where the airbox used to be and the airbox cover holds it in place. You do have to cut a hole in the airbox cover for the fill. Mike from Long Island has an extra cover that is allready cut and I think it's for sale.

[Jeb]

Yep, got to cut the top of the airbox cover. :(

[J.D.]

Don't worry Jeb I wouldn't do it except my plastic some ding-a-ling already cracked it, so it's no biggy. All you have to do is just cut 1 hole for the filler and that's it?

[200xman]

The hole is actually a little bigger than the filler. The top of the tank sticks out about 1".

[TRI-Zbrian]

how much gas does the zinger tank hold i was thinking about doing this mod also but did no if i wanted to be running out od gas all the time out in a sand pit because i usualy ride right from my house i dont truck my machine to the pits.

[hondatrikesrule22]

It holds 1.2 gallons if I rememeber correctly.

[TRI-Zbrian]

about how long will a zinger tank of gas get me pit riding i want to no if its worth it i just dont want to have to refill it every hour.

[J.D.]

Probably not very long. What I'm gonna do with mine is make it so it drains into my main tank when it gets below a little bit, so I have 3 gallons of gas + reserves. heehee

Could I get an above pic of how the Zinger tank mounts?

[TRI-Zbrian]

yeah id also liek to see soem pix of it installed guys i like the fact of being able to take that old tank off the ass end and be able to bolt a high flow clamp on type air filter on the beast in place of the restrictive air intake it has right now.

[J.D.]

I don't think you have to take off the main take to put on a clampon filter? DO YOU? IF I DO THAT RUINS ALL MY PLANS NOOOOOOOOOO!

Ahh I think it'll fit, just have to do away with the coolant overflow bottle. make a tube run to the ground.

[TRI-Zbrian]

yeah i herd you do but taking out justthe coolent over flow might work as well but im not sure i herd you had to ditch the rear gas tank all together.

[Tri-Z Pilot]

I have a clamp on filter on mine, but it just barely hits the tank, I am going to make an elbow joint to angle the filter a little bit.

[TRI-Zbrian]

can you take a pic of your clamp on filtter it must be a tight fit in there

[Tri-Z Pilot]

I dont have any film right now, but I will take some pics asap, you have to ditch, or relocate your overflow bottle.

[TRI-Zbrian]

cool yeah pix would be cool man and thanx for the info how much of a power increase did you get when you diched the old air box set up for the clamp on filter?

[Tri-Z Pilot]

I am not sure, the bike came with a clamp on filter, but it ran like a raped ape.

[TRI-Zbrian]

yeah it kind of sux getting a machine with mods all ready done to it because you dont get to see the improvements your self.

[J.D.]

Nobody has any detailed pics? :(

[TRI-Zbrian]

yeah i know coem on guys help us out lol :twisted:

[Tri-Z Pilot]

I'll get some pics asap.

[TRI-Zbrian]

thanx man for the help