newfiebullet
04-14-2013, 09:32 AM
after 2 weeks off and on i have my 3 wheeler done....from the first pic you will see she wasnt much when i bought her., and it was worse then it looks.
so here what i did, ill try to remember and by new i mean replacement part in better condition than i had.
-completely redid the wire harness one end to the next , cleaned up the mess and loomed everything.
-Built A Battery Box
-got a battery
-had to remove the front rack and grind the bubblegum welds from the forks.
-stripped down to bare frame and cleaned,degreased and painted everything.
-painted complete rearend,black housing and gunmetal axles and hubs.
-painted engine gloss black, took a few hours to get it clean.
-replaced shift assembly
-replaced all piston rings
-all new top end gasket kit
-valves re adjusted
-replaced clutch friction plates and springs
-new headlight,whole light was replaced with a 6x4 sylvania.
-replaced main switch
-new handlebars
-new throttle,cable, and needle
-new air filter
-oil filter change
-Complete Fluid Change
-Carb and tank and fuel lines all cleaned (twice)
-new tires on the way
-new yamaha front fender on with mudflap
-rims and forks painted gunmetal
-exhaust changed and highflow muffler
-scraped, sanded and burned to refinish the fenders and all plastic on the bike
-new gas tank cover with no cracks
-electric start now works
-added a cigar lighter plug
-refinished rear rack.
-now has a rear taillight.
might be more but i think thats it...dont mind the paint on the tires, they are going to be replaced soon.
day one when i bought it
167388
167389
167390
167391
167392
167393
167394
167392
167395
167396
167397
so here what i did, ill try to remember and by new i mean replacement part in better condition than i had.
-completely redid the wire harness one end to the next , cleaned up the mess and loomed everything.
-Built A Battery Box
-got a battery
-had to remove the front rack and grind the bubblegum welds from the forks.
-stripped down to bare frame and cleaned,degreased and painted everything.
-painted complete rearend,black housing and gunmetal axles and hubs.
-painted engine gloss black, took a few hours to get it clean.
-replaced shift assembly
-replaced all piston rings
-all new top end gasket kit
-valves re adjusted
-replaced clutch friction plates and springs
-new headlight,whole light was replaced with a 6x4 sylvania.
-replaced main switch
-new handlebars
-new throttle,cable, and needle
-new air filter
-oil filter change
-Complete Fluid Change
-Carb and tank and fuel lines all cleaned (twice)
-new tires on the way
-new yamaha front fender on with mudflap
-rims and forks painted gunmetal
-exhaust changed and highflow muffler
-scraped, sanded and burned to refinish the fenders and all plastic on the bike
-new gas tank cover with no cracks
-electric start now works
-added a cigar lighter plug
-refinished rear rack.
-now has a rear taillight.
might be more but i think thats it...dont mind the paint on the tires, they are going to be replaced soon.
day one when i bought it
167388
167389
167390
167391
167392
167393
167394
167392
167395
167396
167397