PDA

View Full Version : Tank filter removal tricks Honda



jays375
03-16-2013, 10:42 AM
Any tips or tricks to removing tank filter from a Honda gas tank?Trying to remove one from 350x and save it.

coolpool
03-16-2013, 11:32 AM
If it's the same style as the 84 BR they can get rusted/stuck in there pretty good. I had to destroy mine to get it out and they are pricey suckers to replace, around $20. You could try to tilt the tank on it's side and spray in a healhty dose of your favorite penetrating oil and let it sit. It's worth a shot.

jays375
03-16-2013, 12:34 PM
Actually got it out.Threaded a 3/8" bolt in it and hooked slide hammer to it.Come,bleed or blister and it came out.

tri again
03-19-2013, 03:07 AM
Actually got it out.Threaded a 3/8" bolt in it and hooked slide hammer to it.Come,bleed or blister and it came out.

x2
I've had luck with a coarse thred lag bolt.
Did you lose that invisible tiny 'o' ring that sits under the gas valve?
I did.

aldochina
03-19-2013, 05:43 PM
doesnt hurt to push them into the tank then fish it out.