PDA

View Full Version : does anyone kno......


tommy boy
03-04-2013, 11:48 PM
What parts are interchangeable for a 350x...I got an 85x n trying to see all my option
ebaccm26
03-05-2013, 12:20 AM
It would help if you listed what kind of parts your curious about, there's not just a list of every single part that can work on a 350x.
tommy boy
03-05-2013, 01:53 AM
I'm new to all this forum's....I kno I've been a member for a bit but 3 kids n time isnt on my side but I'm back now......but on a better note im glad u put it in prospective in 1 answer to my thread....so wld u kno any exhaust that wld work on the 85 350x......thanks again n RIDE OR DIE ATC....
falloutboy
03-05-2013, 02:16 AM
The header from a 400ex will bolt up with some modification. The midpipe (after the 2 into 1 section) has to be reworked. Also, when I did the swap on my brothers 350x, we had to drill the flange mount holes a couple sizes larger.
tommy boy
03-05-2013, 11:06 AM
Thanks falloutboy...I will b looking into it all my options
vegas250rr
03-23-2013, 05:30 PM
lots of cans will bolt up to the frame, but you have to use the stock pipe works or that of the fore mentioned 400... what were you looking to do with it?

here is just one example ... it was built by Kasey for me a few years back.
http://i112.photobucket.com/albums/n194/youngberg1/Trikes/350x/DSC04983.jpg
http://i112.photobucket.com/albums/n194/youngberg1/Trikes/350x/DSC04977.jpg