PDA

View Full Version : yamaha tri-zinger oil leak ?



dustrunner
03-01-2013, 12:52 PM
got it running great = but it leaks oil out of the tube that comes out of the right side of the engine in the back that runs up to the air box and is hooked into the side like an " s " and then points down to the ground ? looks like the new engine / transmission oil i just put in ?:wondering i was thinking that was a vent but ?

dustrunner
03-02-2013, 11:10 AM
bump....?? could the pressure inside the tranny pump the oil out ?

russ98atc
03-03-2013, 08:24 PM
how much oil is it pumping out like a few dripps?

old-yellow
03-05-2013, 04:29 PM
did you fill it according to the manual, make sure that its not overfilled because that could be the reason why its coming out

dustrunner
03-05-2013, 04:54 PM
correct amount 32oz. the oil sprayed out of the tube and was 2" wide and 8 " long on the garage floor.....

old-yellow
03-05-2013, 07:46 PM
i just went out to the shed to look at mine to understand better and assume your talking about the vent coming of the lower right side of the motor (when your sitting on it) the only thing i can come up with maybe that would cause it to push transmission oil out is that the crankshaft seal is letting in compression from the crankcase forcing out the oil. on a side note what color is the smoke coming out the exhaust is white or blue? try doing a leak down test to see if the crankshaft seals are any good in it. just my two cents about it

dustrunner
03-05-2013, 07:53 PM
exhaust smoke is blue...im not a 2 stroke guy = how do i do a leak down check ?

old-yellow
03-05-2013, 08:10 PM
thats good that its blue, if it was white that would mean thats burning transmission oil, here's a good link to how to build one or and operate it http://www.3wheelerworld.com/showthread.php/71487-Building-and-operating-a-leak-down-tester.-My-technical-process-and-suggestions you can also pick one up if you dont feel like making one but you will have to make your own plugs and block plates for the exhaust and intake on the trizinger. here's another link to build one http://www.3wheelerworld.com/showthread.php/96856-Make-a-leak-down-tester-for-about-20

old-yellow
03-05-2013, 08:19 PM
here's a link to a cheep one for sale,http://www.harborfreight.com/cylinder-leak-down-tester-94190.html

dustrunner
03-05-2013, 11:01 PM
sweet = thanks alot.....