yamaha tri zinger gear oil ?

[dustrunner]

what should i use and how much ? its blue so i think it's an 85...:wondering

[russ98atc]

300 ml. or .32 qt. of 10w-40 or 10w-30. Theres a sticker on the frame behind the front fender that will say the year (if its still there). If you need any other references there's a complete manual here http://www.oscarmayer.net/atc/manuals/Yamaha/tri-zinger_yt60_servicemanual.pdf

[dustrunner]

ok, thanks alot guys...

[fabiodriven]

300 ml. or .32 qt. of 10w-40 or 10w-30. Theres a sticker on the frame behind the front fender that will say the year (if its still there). If you need any other references there's a complete manual here http://www.oscarmayer.net/atc/manuals/Yamaha/tri-zinger_yt60_servicemanual.pdf


It's not hypoid gear oil, and it's not grease either. It comes in a tube and is availiable at the Yamahe dealer and is called Grizzlly grease. It's has a consistency like jelly. It's used in the cvt of the yamaha grizzly atv's, and others. The axle assembly has to be removed and cleaned in a pressure type solvent tank with ring and pinion exposed. Then squeeze contents into housing. It's the correct lubricant for the tri-zinger.

OK, you can't both be right here ladies. Let's hash this one out, shall we?

[russ98atc]

[QUOTE=fabiodriven;1200583]OK, you can't both be right here ladies. Let's hash this one out, shall we?[/QUOTE
tecate-z was referring to the grease for the rear axle housing

[fabiodriven]

Ya I know now. We actually sorted that out in one of the OP's 7 other threads about Zingers.