anybody fix 2 stroke pipes

[poohbee1]

:cry: smashed a ct pipe right on the weld does anybody fix them . I have another but i was trying to save that one.162758

[84honda200s]

it can be welded up using a mig and stainless wire. (assuming its a stainless pipe)

[Yamaha_Rules69]

That dosent look bad at all. I would consider that a ding. Some guys have had luck with spot welding a rod on there, and using a slide hammer to remove the dent.

[poohbee1]

I think I will take it off and put the other one on. I have a friend at a body shop I will see if he can do anything with it. still works great.

[ebaccm26]

There is another method that involves plugging one end of the pipe and attaching an air hose to the other. Then you set it to a high enough psi to get some pressure built up and use a torch of some kind to heat the spot where the dent is. With any luck it should pop out, for more detailed info I'm sure you could find a video on youtube.

[atc007]

That will DEF pop with the air method.. VERY nice bike man,,very nice!!!!!!!!!

[poohbee1]

the air method looks kind of scary .thanks 007 finally got a complete short track kit now all I need is some aftermarket shrouds that fit so i can take mine off and put them away with the red tank.