85 tri swingarm bearings

[03 ORANGE SHEE]

where do i find them since pivot works doesnt make or stock them and yamaha stopped making them :?:i tried a banshee kit but there 2mm. too small HELPPPPPPPP!! :!: also the seals and nylon inserts?

[Tri-Z Pilot]

Try www. bikebandit.com

[03 ORANGE SHEE]

thanks but no luck there :evil: ,all they have is pivot works

[Jeb]

I got pivot works kit for My R. They are cool.

I got to thinking about what I could do for the Tri-Z and KXT. I was looking at the 85 YZ 250 or Blaster kit for the Tri-Z.

Just a thought. I've never bought them to try.

[03 ORANGE SHEE]

thanks!!ill try the blaster,the swingarms are about the same

[twgranger]

I bought new swingarm bearings and everything that goes in it at my local yamaha dealer for my tri-z.

[TimSr]

The Blaster doesnt work. The needle bearings are almost the same, but fit loose, and the rest of the kit doesnt work at all.

I bought OEM less than 6 months ago for my Z. I cant remember which, but I got them either at partsfish.com or bikebandit.com.

[okieRrider]

i bought oem for mine also a couple of months back...lol beware they are expensive...chris

[03 ORANGE SHEE]

thanks everyone ill retry at my local "stealership" :shock:

[Tri-Z Pilot]

Ive already tried pivot works, obsolete. I had to get genuine yamaha bearings and seals through my local shop, for everything it was only like $85 bucks, I was amazed, my local yamaha dealer wanted $125, sheesh!

[Tri-Z Pilot]

I just checked bikebandit.com, they have everything that you need, look under OEM.

[03 ORANGE SHEE]

thanks tri z ,,i just looked under pivot works ,thanks for everyones research :-D now i know just where too look :shock: