200X lower cam sprocket

[hogmuffin]

The lower cam chain sprocket, the one on the crankshaft, its badly worn. is this a press on sprocket? any tips or tricks on how to pull it off?

[shortline10]

I use a slim style gear puller or if it doesn't budge with that I have cut a few off with a dermal cutting wheel . When reinstalling you can use a deep well socket just line a tooth up with the key way and tap it lightly with a hammer till it bottoms out .

[hogmuffin]

Thanks alot for the info . I'm going to try my puller tonight.

[oldskool83]

a guy got mine off by heat and a chizzel, also took out my crank bearings at the same time. they gears are still sold new i think, id prob buy a few sets. Mine was nearly mint from my motor

[hogmuffin]

I got it off, had to modify my puller a little bit, and heat it up with a propane torch.