12volt atc 70

[fannitti]

I want to add a 12 volt stator to my atc 70. I know if I install it ill have to shave a little bit of the case. Question if I can't find a 12 volt kit with a pull start flywheel that will take the cage of my recoil. Any xr or crf 70 or 50 stator will work its finding a flywheel with a pull start ready and staying 12 bolts like I want. And help would be great thanks

[shortline10]

Did you check out dratv's cdi conversion kit that comes with a new flywheel and 12 lighting coil ?
I think this is the kit for the 4 speed atc .
http://www.dratv.com/cdfotr.html

[fannitti]

That's a great kit but I need to mout the cage for the pull start that the problem

[fannitti]

Well I found a adaptor that can be used so I can have a 12 volt stator and flywheel on a 6 volt motor. My question is how can I get that 12v flywheel to work with my pull start and factor side cover for the recoil?

[shortline10]

Tap it out and bolt it on just make sure its spaced correctly .



Well I found a adaptor that can be used so I can have a 12 volt stator and flywheel on a 6 volt motor. My question is how can I get that 12v flywheel to work with my pull start and factor side cover for the recoil?

[fannitti]

trailprotrailpro saying drill and tap the flywheel for the cage and recoil?

[shortline10]

Yep mount the cage to the flywheel .
trailprotrailpro saying drill and tap the flywheel for the cage and recoil?

[fannitti]

Yea wonder if ill have to get one of those plates I see for the lifan engines that space out so u can use trailprotrailpro stock pull start

[Cave Rider]

If you only want headlights,then you dont need to convert. I have a light on mine and used a 250R regulator and headlight.

[fannitti]

I want 12 volt it's better and wanna run a led head light. I just got in the one in from eBay cdi buts its still 6 volt

[Cave Rider]

Rodger that ... Interested to hear how you make out.

[fannitti]

I found out more info I can use the graber cage drill it out a lil bigger so it sits flush on the flywheel drill and tap new holes bolt it up with my new 6 to 12volt adaptor on the crank file away part of the case for the new Taylor and do the same to the cover. I just hope the atc cover will work cuz I know the trx was a cdi motor and that cover was a little bit bigger. Dose anyone not understand what I'm saying and if u do understand u think it will work?

[Thorpe]

The trx cover is how I adapted my Lifan, but still required modification the clear the pick up coil... There are spacers just for the recoil being sold too

[fannitti]

i found a trx 70 motor im going to use put a new highout put stator and stuff. i want to run a led head light like hondaatc70.com sells but they say it needs constant power and i need a battery wtf

[bannedbrraap]

The battery is no big deal to mount if you still have the rear skid plate, just make a little tray to hold the small battery and stuff it up into the rear frame.