Anyone have a video for adjusting valves?

[maxdallasfan]

I need a vid for a 1983 yammy 200k.

I found a good one on DRays YouTube channel, but that is for a Honda 200s.

My valves are beginning to chatter a little.

[Jason125m]

Your service manual should walk you through it just fine. In my opinion i think adjusting valves are something that people overthink, its one of the most simple things to do. Easier than changing your oil.

[maxdallasfan]

I know. I get nervous thinking ill screw it up

[Jason125m]

Nothing to screw up, tdc, valves loose, use a feeler and set them to whatever the manual says. Adjust to slight drag on the feeler, tighten the nut. Done!

[Dirtcrasher]

Just realize that if it has an adjusting nut once you tighten it you be changing that adjustment so check them again to be sure.

[userj8670]

Just realize that if it has an adjusting nut once you tighten it you be changing that adjustment so check them again to be sure. Amen to that!

[Jason125m]

I always try to double hand it, hold the adjuster with needle nose vice grips and tighten with an open end wrench. But still, double check it..

[maxdallasfan]

Ahhhhhh. Ok. Thanks guys.