PDA

View Full Version : engine swap questions



diesel
10-20-2012, 12:24 AM
84 cdi 110 motor smokes like a trailprotrailprotrailprotrailprotrailprotrailprotr ailpro. Picked up a points 110 on the cheaps. Runs doesn't smoke. Took the wiring harness and motor from the donor.

Will the top end just swap over? Or should I just put the points motor in the cdi frame?

The cdi bottom end is 100 percent. Don't know about the points unit. Have a new carb currently on the cdi unit

diesel
10-20-2012, 11:45 AM
Bump. I am going to be doing this tomorrow morning. Need to know which way to go. Looking for easy.

200X FT
10-20-2012, 06:48 PM
I'd say swap the whole points motor in with its wiring harness for now and rebuild the CDI motors top end. then swap it back out after you get it rebuilt. I think the top end could swap over, but I'm not sure if the points themselves can be swapped in or not. I hope this is some help.

diesel
10-20-2012, 06:59 PM
I did some searching. Gonna swap the top end and use the cam and cdi unit from the near motor. It should swap right over

200X FT
10-20-2012, 08:03 PM
cool deal. good luck