need a upper chain roller for tri z

[pcs]

been looking around for the upper chain roller from my tri z and i found this one
http://www.allballsracing.com/79-5008.html
has anyone here used this one or any other options available

[El Camexican]

I don't know if this will help, but I bought a set (don't recall the brand, but nice high end stuff) I was pissed because the bolts they came with were a larger diameter (8mm) than the stock Tri-z hole (6mm) even thought they listed it as suitable. I ended up drilling and tapping my frame to suit the 8mm bolt. You may have to do the same if you can't find some with 6mm thread bolts. You can see them in these photos. Sorry they aren't specificaly of the rollers.

155420155421155422155423155424

[Bryan Raffa]

order a OEM yamaha warrior upper roller!

[pcs]

el camexican: from your #1 you posted it looks like a roller from alba racing i saw i ebay, looks good but the bolt size they listed didnt match up, looks real nice.
bryan: ill try the warrior roller thx

[pcs]

hey brian i looked at the warrior roller and the pics show it has no bearing and some of the pics that show show replacements for the tri z show the roller with a bearing, could just be a generic photo. the original was missing on my tri z so im not sure what its suppose to look like. so is it suppose to have a bearing?

[just ben]

I have a feeling Bryan knows what he is talking about.

[XxMurdocxX]

hey brian i looked at the warrior roller and the pics show it has no bearing and some of the pics that show show replacements for the tri z show the roller with a bearing, could just be a generic photo. the original was missing on my tri z so im not sure what its suppose to look like. so is it suppose to have a bearing? no the oem chain sliders didn't have bearings. You should go with the oem warrior chain sliders they are the same size as the z.

[Bryan Raffa]

http://www.ebay.com/itm/YAMAHA-YFM350-Warrior-1987-2004-UPPER-CHAIN-ROLLER-/140862462303?pt=Motors_ATV_Parts_Accessories&hash=item20cc0e995f&vxp=mtr

let me know how it work's .. that might do away with the stupid plastic collar .. and be just one piece!

[pcs]

im hoping to get rid of the plastic collar bc it looks ugly, im going to order the ebay all balls. i also noticed i do hot have a swing arm slider, the one that wraps around the front of the swinger by the counter sprocket, is that part tri z specific or will it swap with another atv? the rear chain guide looks like a banshee slider and is where its suppose to be. thx so far for all the help

[Bryan Raffa]

go to the 3ww store John makes them .. Hope he's has them in stock! , there discontinued , yes tri z specific.

[badass350x]

these are the ones I used on my build! the top one you have to cut the stud off the frame and use the bolt that came with the package, the bottom one is a bolt on deal an both are ball bearings!155481155482

[badass350x]

the rear slider is a banshee and has to be modified to fit the bracket on the Z swinger, the front one is from john as mentioned above!

[El Camexican]

el camexican: from your #1 you posted it looks like a roller from alba racing i saw i ebay, looks good but the bolt size they listed didnt match up

Now that you mention it I think I called them up and read them the riot act after I realized they didn't fit. I guess they took notes.:naughty:

[TimSr]

the rear slider is a banshee and has to be modified to fit the bracket on the Z swinger,



Or you can just get the Warrior rear slider which is the same part as the TriZ.