Replacement/subsititute cylinder studs for US90?

[Scootertrash]

I may be in need of replacement or substitute cylinder studs for a 1972 US90.

Suggestions please?

ETA: I'm doing the motor work on a restoration of a 73 US 90. Cases are going in for beadblasting and powdercoating and the owner asked that I remove the cylinder studs (The long ones ;)) I am having trouble removing them from the crankcases.They have been soaking in kroil for the better part of 2 weeks, in addition to applying heat generously. I am using a cylinder stud removal tool. I have removed 2 of them but the other 2 are really stubborn.

TIA for the help gents!

[atc500x]

AtC90, S90, ST90, CT90, C90.....

[Howdy]

How many do you want? I have plenty of them ( Used ).
Howdy

[Scootertrash]

How many do you want? I have plenty of them ( Used ).
Howdy

I'll need one for sure. They must be different lengths or something, the microfiche has 2 different part numbers: 1 of each on each side of the cylinder. I dropped it off at my machinist to have him remove the broken stud stub and to pull the other stud. I'll see how that pans out.

[oscarmayer]

yes 1 side was slightly longer than the other,