tri z brake upgrade?

[XxMurdocxX]

Im wondering if anyone knows of a brake caliper that would swap over to the tri z front mount? I have a brembo dual piston caliper for the rear. It will be mounted on a banshee bearing carrier with a custom mount built just for the caliper. Here is a link for the schematic. http://www.oppracing.com/images/cmsuploads/Brembo/OEM_Schematics/oppracing%2020-5161-33_43%20FP%20brembo.pdf . Any info on this would be greatly appreciated.

[XxMurdocxX]

Found out that the brake caliper is a direct bolt on for the front mount so if anyone is looking to upgrade the front brake the rear brembo brake caliper from a ducati monster will work for the front brake.

[Xowner]

well if it fits the front the rear caliper is the same as the front so shouldnt it work on the rear also?????? Pictures?

[XxMurdocxX]

I don't know how to upload pics on here from my phone. I have been taking alot of pictures on this tri z build so once i get the screen replaced on my laptop i will post them all in the build thread. I was trying to get a bearing carrier made with a custom mount but nobody wants to get back to me. I want to find one that is a direct bolt on for the stock bearing carrier. The closest one i found so far is 100mm and the stock carrier mounts are 98mm.

[CRAZY70MAN]

several older calipers will swap with the tri z. Do a google search and you will find them. I used to have the link.....I will look for it....
•YZ125 - 1988 (rear)
•RT180 - 1990 to 1997 (front)
•TT225 - 1986 to 1987 (front)
•TT-R225 - 1999 to 2005 (front)
•XT225 - 1992 to 2000 (front)
•YZ250 - 1988 (rear)
•XT350 - 1985 to 2000 (front)
•XT600 - 1990 to 1995 (rear)
Yamaha ATV Brakes :
•YFM350X Warrior - 1987 to 1988 (front)
•YFZ350 Banshee - 1987 to 1989

I beleive that is the post.........I have used some of the tt fronts off ebay just cause I found them cheap. Good luck

[Bryan Raffa]

there's not several... there two.... xt 350 left front.,,,,, and the XT 225

[Xowner]

I don't know how to upload pics on here from my phone. I have been taking alot of pictures on this tri z build so once i get the screen replaced on my laptop i will post them all in the build thread. I was trying to get a bearing carrier made with a custom mount but nobody wants to get back to me. I want to find one that is a direct bolt on for the stock bearing carrier. The closest one i found so far is 100mm and the stock carrier mounts are 98mm.

Can you email them to me? jonathan3333333@yahoo.com or pm me and ill give you my text cell phone to text it to me

[Bryan Raffa]

Nice list andy!

[640AK]

Do the twin piston calipers from the XT 225 fit the front of the Tri Z?

[Bryan Raffa]

banshee and warrior pads will work,,,,,, not the caliper.. take a look where the line connects.. gonna have to go through that list and double check.