350X Clutch

[beets442]

Replacing the clutch and cant find OEM springs. Thought about using a Vesrah or using the whole kit. Any ideas?Thanxs

[Dirtcrasher]

Don't use Vesrah fibers. Grab some Barnett H-D springs and beat on it :D

If you buy a Vesrah or EBC kit, I will land on you at Trikefest :D

[Russell 350X]

Do everything Barnett...or OEM plates and fibers and Barnett springs...

[wonderboy]

^ x2.

The recipe for my two 350x's was new Honda OEM fiber and steel plates and heavy duty (aftermarket) springs. Can't remember the brand of springs I used, but the Barnett ones mentioned above seem to be top notch (based on past readings and current recommendations). It isn't cheap for the OEM Honda fibers and steels (right around $100), but after lots of reading, it seemed to be the most reliable way to go.

[Dirtcrasher]

I use all Honda or Barnett.

Unless you enjoy pulling the clutch cover, replace with OEM HONDA and Barnett has not let me down either but they aren't 26/27n year old BEAT! And still running hard. Open that wallet!!