4-110 front hub?

[chrismoore]

im looking to change out the front hub of my 82' 200 project to a 4-110 lug pattern I was wondering if there are any hubs out there that will work with my forks and axle, i am going to be using the front assembly from a 200s. If not is there another front fork assembly what i can use so i can get a 4-110 pattern hub.

[shortline10]

Nothing that i know of in 4x110 mm Whats wrong with using a the stock 200s 4x130mm ?

[chrismoore]

decent looking rims are hard to come by in my area and they are too expensive for me to buy online. i have a 350x front end I was going to put on it, ive seen ppl do it that say all they had to do was change the steering stem i dont know if thats all true though. i want a bigger rim and narrow tire (since im going with a suspended front fork). what would you suggest? oh and i do not have a rim for the 350x front. just triple tree, shocks, and hub, i still need and axle and rim. if anyone could direct me to a reasonably prices decent looking rim for the hub i'd appreciate it. or a narrower rim that would be centered on a 200s fork.

[audioworks04]

If you are going to use the 350x front end, you need (read have to) use the whole assembly, that includes forks, axle, hub, brake rotor and caliper hung from the 350x triple trees. As far as a hub goes, the only thing you can really do besides have one custom made one-off, is to drill a wheel to fit your hub, but you will be limited on your wheel selection based on wheel offset and brake rotor clearance. Really your only practical option is to run a stock wheel from a 200x, 350x or 250r, or get the 10" in the group buy.