atc 70 lifan help needed

[Yamahajake]

guys i have my 70 with a 125 lifan in it i need some wiring help it has 6 wires comming out of the stator cover a yellow, white, blue with white, green, black with red, green with red. I have seven wires in the wire harness blue and white, black and red, green, green, black and white, then a male end 2 prong plug with 1 green and one black with white. and then 2 wires off the kill switch can someone help me out with this??

[MonroeMike]

http://www.hooperimports.com/showpages.asp?pid=1013

[jb2wheels]

I have a 125 Loncin e-start for my 70.

The yellow and white wires are the lighting/charging coil output. They should go into the regulator as shown on the Hoopers image.
Black/red is CDI trigger. It goes into the CDI.
Blue/white is CDI/spark power. It goes into the CDI.
Green is ground. Ground to the frame somwehere.

Green/red does not really come from the stator - it comes from the gear indicator switch. It's the ground path for a neutral indicator.

I can't help with your harness - you'll have to trace the wires to figure out where they go and what they do.