85 250es Wiring Question

[ZacH_GrifF]

My neutral/reverse safety switch connector is all cracked up and in pretty bad condition. Does anyone know where I can get a new one for it? It is working as of right now, but I would like to have a new one on there for peace of mind due to the fact that I do alot of trail riding and dont want to have to push the bike a couple miles out of the woods if it finally cracks and falls off.

[kb0nly]

http://www.vintageconnections.com/

They have all the connectors you will find on these trikes.

[ZacH_GrifF]

Thanks, but I did not see what I'm looking for. I'm looking for the connection between the wire and the switch, not the connector between the harness and the sub-harness. I'm looking for number 24 on the microfiche. Its discontinued and I don't know where to get it.


http://www.hondapartshouse.com/home.aspx#/Honda/ATC250ES_A_(85)_ALL-TERRAIN_VEHICLE_(ATV)%2c_JPN%2c_VIN%23_JH3TE040-FM000004_TO_JH3TE040-FM109846/RIGHT_CRANKCASE_COVER/ATC250ES-85-JPN-A/2Y14HA0FBHA055C

[kb0nly]

http://www.ebay.com/itm/1986-86-Honda-250-ES-neutral-reverse-sensor-wire-/270983521526?pt=Motorcycles_Parts_Accessories&hash=item3f17e064f6&vxp=mtr

Other than that one on ebay i have no idea. I don't have a 250ES here to look at to tell you what type of terminal it is and i can't find a good enough picture of one. I would guess its a crimp on terminal that could be found somewhere but i would have to see one.

[ZacH_GrifF]

Yea i saw that earlier and I didnt see any other options so i just bought it.

[Dirtcrasher]

I have an 85 ES cover that may have that portion; It also has a reverse wire connected nearby correct??

[jeswinehart]

Get ahold of Howdy or Catptainweezy, between those two fellas I am sure one of them has what your looking for.
http://www.3wheelerworld.com/member.php/21076-captainweezy
http://www.3wheelerworld.com/member.php/5-Howdy

[ZacH_GrifF]

Thanks guys i bought one off of ebay. If it dont work or is wrong I'll let you know.

[atc350xer]

A little tip for that switch... I put a small piece of styrofoam between it and the sheet metal cover... it'll never fall off if you do that.

[ZacH_GrifF]

Thanks for the tip atc350xer.