PDA

View Full Version : Is My Wiring Correct?? Pics Incl.


Bransharksfan
05-10-2012, 02:43 PM
Ok I'm on the wiring phrase and I think I have it correct but better safe then sorry.

CDI wires Blue and White:
http://i5.photobucket.com/albums/y175/brandonsharksfan/Trike%20Wiring/DSC00882.jpg

Wires by little sprocket black/red and yellow:
http://i5.photobucket.com/albums/y175/brandonsharksfan/Trike%20Wiring/DSC00883.jpg

Black/red to black/red yellow to yellow:
http://i5.photobucket.com/albums/y175/brandonsharksfan/Trike%20Wiring/DSC00885.jpg

This is a questionable one but the only connections left:
http://i5.photobucket.com/albums/y175/brandonsharksfan/Trike%20Wiring/DSC00886.jpg

Last but not least the black wire with the hoop on the end?? where does this go?
http://i5.photobucket.com/albums/y175/brandonsharksfan/Trike%20Wiring/DSC00887.jpg
SteveCZ28
05-10-2012, 03:28 PM
im not sure about your other wires. but the wire with the loop on the end will get grounded to the frame somewhere
rdlsz24
05-10-2012, 03:38 PM
What motor is this? OEM 200x or Lifan replacement? If it's oem all those wires should match color for color. The one with the loop gets grounded by the ignition coil.

Rob
Jason125m
05-10-2012, 03:42 PM
Service Manual
Bransharksfan
05-10-2012, 03:46 PM
What motor is this? OEM 200x or Lifan replacement? If it's oem all those wires should match color for color. The one with the loop gets grounded by the ignition coil.

Rob

OEM I believe. I bought it from shortline10 Has a new topend fresh bore and wiseco 10:5 piston. I think the loop goes through a bolt that holds the ignition coil to the frame.
Bransharksfan
05-10-2012, 03:48 PM
Service Manual

Got it and read, reference all the time with it. Does not show anything wire to wire.
rdlsz24
05-10-2012, 04:05 PM
The wire colors coming from the engine are correct. It's possible that your wiring harness could have been repaired at some point. Basically you have 2 wires coming from the stator and 2 coming from the pulse generator. Everything makes it's way up towards the headlight

Rob
oscarmayer
05-10-2012, 06:39 PM
the bog end you asked about is a gorund. i usually find a place on the frame or engine and bolt it down. on my 200x i used the engine ant took out a case bolt ant put it ther ethen retightened the bolt. perfect.
shortline10
05-10-2012, 06:43 PM
The wire with the HOOP on the end gets grounded to one of the coil bolts .