In a pinch, need an alternative oil fill plug for my Ti Z

[Tyler 54]

Need this last part by tomorrow, Anybody know of anything that woull fit in its place?

[just ben]

auto parts stores usually have a good selection of oil plugs. The quickie lube places normally stock a selection too.

[Tyler 54]

For the Actual fill plug on the clutch cover?

[Scootertrash]

They have a selection of oil plugs for various vehicles. You may be able to find one that fits.

[Mosh]

Expandable rubber freeze plug will be your best bet.
However, they only go down to 3/4 of an inch in diameter which will be close on the Z. If i am not mistaken the opening is only a little over 1/2 inch wide.
So you would have to trim the rubber off the plug.
http://www.dormanproducts.com/c-354-expansion-plugs-quick-seal-rubber.aspx

SBLT500R makes some nice billet ones for the Z.

[Tri-Z 250]

:lol: When I saw this post, Mosh:I thought of the Playtex trailside repair kit story:lol:

GO BILLET!! who don't like Bling?

[badass350x]

Member SBLT500 has a billet cap that he makes , Awesome part look him up!!

[Jon Boy]

Expandable rubber freeze plug will be your best bet.
However, they only go down to 3/4 of an inch in diameter which will be close on the Z. If i am not mistaken the opening is only a little over 1/2 inch wide.
So you would have to trim the rubber off the plug.

or you could just use a waterline plug (not sure what it's actually called) same thing as the rubber freeze plugs, but can be found in smaller sizes and have a plastic wing nut instead of a regular nut. check around the hardware stores. :beer