Bransharksfan
05-07-2012, 06:19 PM
OK I have been at this for hours and I have tried everything!
I bought the all balls kit. The top bearing set just does not look it it fits!
Here are some pics:
Bottom raceway installed.
http://i5.photobucket.com/albums/y175/brandonsharksfan/Trike%20Rebuild%20Part%202/DSC00846.jpg
Base of the stem with washer and bearings installed.
http://i5.photobucket.com/albums/y175/brandonsharksfan/Trike%20Rebuild%20Part%202/DSC00850.jpg
HERE IS WHERE I THINK THE ISSUE IS:
Top raceway and bearing on top of frame.
http://i5.photobucket.com/albums/y175/brandonsharksfan/Trike%20Rebuild%20Part%202/DSC00847.jpg
Pic with stem inserted.
http://i5.photobucket.com/albums/y175/brandonsharksfan/Trike%20Rebuild%20Part%202/DSC00848.jpg
I can not get the top thread nut on. If I remove the washer from the bottom of the stem the lower triple tree scrapes on the stop guide on the frame.
I dont know what to do??????
I bought the all balls kit. The top bearing set just does not look it it fits!
Here are some pics:
Bottom raceway installed.
http://i5.photobucket.com/albums/y175/brandonsharksfan/Trike%20Rebuild%20Part%202/DSC00846.jpg
Base of the stem with washer and bearings installed.
http://i5.photobucket.com/albums/y175/brandonsharksfan/Trike%20Rebuild%20Part%202/DSC00850.jpg
HERE IS WHERE I THINK THE ISSUE IS:
Top raceway and bearing on top of frame.
http://i5.photobucket.com/albums/y175/brandonsharksfan/Trike%20Rebuild%20Part%202/DSC00847.jpg
Pic with stem inserted.
http://i5.photobucket.com/albums/y175/brandonsharksfan/Trike%20Rebuild%20Part%202/DSC00848.jpg
I can not get the top thread nut on. If I remove the washer from the bottom of the stem the lower triple tree scrapes on the stop guide on the frame.
I dont know what to do??????